# 16 means the I2C run bus is latched. The EPROM has to be changed or reinitialized with chipper check. Al Marquardt ampm@xxxxxxx Al Marquardt Electronic Repair 206 W Main Girardville Pa. 17935 ----- Original Message ----- From: <daryls_tv@xxxxxxx> To: <TechAssist@xxxxxxxxxxxxx> Sent: Friday, August 27, 2004 9:23 AM Subject: [TechAssist] RCA, G36705, CTC197, No Sound > > Hi, > I guess I have been fortunate not to encounter this type of problem on this chassis until now. I suspect the eeprom. I checked the menu setting and it shows "variable audio 1 speakers ON", "variable audio 2 speakers OFF, "fixed audio 3 speakers OFF". I tried to change these settings but no effect. The volume bar is functioning. I unplugged the set for several minutes to see if the Guide Plus would possibly be the problem but no help. I am getting error code 16 but I don't have any information as to what this correlates to. I checked all of my tips and old e-mails for help and all I found was to re-initialize the eeprom. I also tried an external speaker and tried the mechanical speaker switch in the rear of the set. > Can I write the perimeters down before I change the eeprom like you do in the 177/187 series sets and place them into the new one?. As you probably figured out, I don't have Chipper Checker and I don't have it in my future. > Any help or tips would be appreciated. > Daryl > Daryl's TV > 2402 Wyoming Ave. > El Paso, TX 79903 > 915-565-9184 Voice/Fax > daryls_tv@xxxxxxx > www.angelfire.com/tv2/daryls_tv > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/