Usually when the Q2906 is bad it'll read 200 ohms or less E to B. You can use a NTE/ECG 159 temporarily. ********************** Bill Grabowski Triangle Appliance 3813 Roosevelt Rd Kenosha WI 53142 262-694-6500 262-694-6523 fax bgrabowski@xxxxxxxxx ********************** Larry E wrote: >Hi Guys, this 35" RCA has a strange problem, set comes on with widely spaced >retraces lines that will not >adjust out with the screen control, I`m hoping this is Q2906 (which I`m >ordering today) but the voltages on it >were real close so it may not be the problem, the wierd problem is at channel >change or turn off the screen gets bright red, I swapped the blue and red >driver transistors on the crt board with no change, checked tube on Sencore CR >70, reads ok, Any ideas ? tia, Larry E > >Larry Eastman >American TV & Electronics >Crystal River, Fl. 34428 > >----------------------------------------------------------------------------- >This Email List is accessible to the general public through search engines. >Remove: http://www.tech-assist.org/remove.htm >Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation >Lost Password: http://www.tech-assist.org and select "Login Problems?". >Email Archives: //www.freelists.org/archives/techassist/ > > > > - ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/