the CRT Socket is between the Output's Voltage and the Tube. BTW,what is the G2 voltage(low and high) Peggs At 06:48 AM 10/13/05, Larry E wrote: >Hi Guys, this 35" RCA has a strange problem, set comes on with widely >spaced retraces lines that will not >adjust out with the screen control, I`m hoping this is Q2906 (which I`m >ordering today) but the voltages on it >were real close so it may not be the problem, the wierd problem is at >channel change or turn off the screen gets bright red, I swapped the blue >and red driver transistors on the crt board with no change, checked tube >on Sencore CR 70, reads ok, Any ideas ? tia, Larry E > >Larry Eastman >American TV & Electronics >Crystal River, Fl. 34428 > >----------------------------------------------------------------------------- >This Email List is accessible to the general public through search >engines. Remove: http://www.tech-assist.org/remove.htm >Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation >Lost Password: http://www.tech-assist.org and select "Login Problems?". >Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- This Email List is accessible to the general public through search engines. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/