[TechAssist] Re: E8 chassis M# HC9919c125 Hotel/hosp set / service mode
- From: "Mouton's Electronics" <moutons@xxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 18 Nov 2004 15:00:56 -0600
Hotel units enabled in Force, how is this done? Is it something I have to do
or is that unlocked with the registration key they give you? Never noticed a
setting in Force itself.
Jason
Mouton Electronics
New Iberia, LA
----- Original Message -----
From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, November 18, 2004 1:12 PM
Subject: [TechAssist] Re: E8 chassis M# HC9919c125 Hotel/hosp set / service
mode
>
>
> I used "menu "also and it does not work . There is a special remote to
set
> the hosp etc settings but it does not seem to set the geometry settings.
If
> you don't have the hotel units enabled in Force it does not give you any
> info for the Hosp. sets Thanks for trying, P.S. If I
> use 062596 menu or status the regular menu comes up.
> Phillip R Hull STET
> phil245@xxxxxxxxxxxxx
> FAX 517--569-3075
> Professional Technicians only
> ----- Original Message -----
> From: "Mouton's Electronics" <moutons@xxxxxxxxxxxxxxxx>
> To: <techassist@xxxxxxxxxxxxx>
> Sent: Thursday, November 18, 2004 1:35 PM
> Subject: [TechAssist] Re: E8 chassis M# HC9919c125 Hotel/hosp set /
service
> mode
>
>
> > Phillip
> > I looked in my manual on force for that one and it says to use 062596
> (menu)
> > and not (status) I know some use one and others use the other. Sometimes
> > there notes on alignments aren't accurate. I don't think this is one of
> the
> > models that require a special service mode remote but if it was it
> wouldn't
> > even tell you in the notes. I had to get Tritronics to do some research
to
> > get the number.
> >
> > Jason
> > Mouton Electronics
> > New Iberia, LA
> > ----- Original Message -----
> > From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx>
> > To: <techassist@xxxxxxxxxxxxx>
> > Sent: Thursday, November 18, 2004 11:25 AM
> > Subject: [TechAssist] E8 chassis M# HC9919c125 Hotel/hosp set / service
> mode
> >
> >
> > > I can not get into the SAM mode to align the vert size. It must be
a
> > > different code than the regular one ( 062596 status)
> > > This combination does not work on these sets (I have six) does anyone
> > know
> > > how to get into the service mode on these hotel/hosp. units I have
> Force
> > > but not the Hotel/Hosp information
> > > Thanks
> > >
> > > Phillip R Hull STET
> > > phil245@xxxxxxxxxxxxx
> > > FAX 517--569-3075
> > > Professional Technicians only
> > >
> > >
> > >
> >
>
> --------------------------------------------------------------------------
> > ---
> > > Lost Password:
> > > http://www.tech-assist.org and select "Login Problems?".
> > > Email Archives:
> > > //www.freelists.org/archives/techassist/
> > >
> >
> >
> >
>
> --------------------------------------------------------------------------
> ---
> > Lost Password:
> > http://www.tech-assist.org and select "Login Problems?".
> > Email Archives:
> > //www.freelists.org/archives/techassist/
> >
> >
>
>
>
> --------------------------------------------------------------------------
---
> Lost Password:
> http://www.tech-assist.org and select "Login Problems?".
> Email Archives:
> //www.freelists.org/archives/techassist/
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
