Phillip I looked in my manual on force for that one and it says to use 062596 (menu) and not (status) I know some use one and others use the other. Sometimes there notes on alignments aren't accurate. I don't think this is one of the models that require a special service mode remote but if it was it wouldn't even tell you in the notes. I had to get Tritronics to do some research to get the number. Jason Mouton Electronics New Iberia, LA ----- Original Message ----- From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, November 18, 2004 11:25 AM Subject: [TechAssist] E8 chassis M# HC9919c125 Hotel/hosp set / service mode > I can not get into the SAM mode to align the vert size. It must be a > different code than the regular one ( 062596 status) > This combination does not work on these sets (I have six) does anyone know > how to get into the service mode on these hotel/hosp. units I have Force > but not the Hotel/Hosp information > Thanks > > Phillip R Hull STET > phil245@xxxxxxxxxxxxx > FAX 517--569-3075 > Professional Technicians only > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/