[TechAssist] Re: Convergence Problem......
- From: "Damon" <damon101@xxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 28 Sep 2001 08:10:18 -0500
I don't know why Bruce, no matter how careful I am installing the HV
splitter, some just require the yoke rings to be adjusted.....sounds like
your problem.
----- Original Message -----
From: "Bruce Tiedeman" <btied@xxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Wednesday, September 26, 2001 7:39 PM
Subject: [TechAssist] Convergence Problem......
>
> Rear Projection RCA .
> PTK 169 PEC (P60752EB) 1995.
> Replaced the HV. Splitter , now have a convergence problem. I was very
> careful not to jar the C.R.T 's. I also made sure the leads where seated
in
> the splitter.
>
> I am at a disadvantage seeing the customer brought the unit to me for
> repair. Regardless I have to fix the problem. Seems the R and blue
> convergence will not adjust up to the green. It is about 1 inch out
> horizontally.
>
> Is there a static adjustment for this condition or is it a yoke tilt
> adjustment ? I have and old service manual from an older projection to
refer
> too.
>
> I need some advice on this , just don't want to get into making
unnecessary
> adjustments and possibly make it worse.
>
> I don't work on that many projection sets am not familiar with their
> adjustments.
>
> Will have to go to the customers house to finish the job.
>
> thanks for any help on this,
>
> Bruce
> B&T Electronics.
>
>
>
> Help make your TechAssist online repair tips
> database better! Submit your fixes here:
> http://www.circuitwork.com/techassist/tip/#tips
> To unsubscribe write to:
> techassist-request@xxxxxxxxxxxxx
> with unsubscribe in the subject line.
>
Help make your TechAssist online repair tips
database better! Submit your fixes here:
http://www.circuitwork.com/techassist/tip/#tips
To unsubscribe write to:
techassist-request@xxxxxxxxxxxxx
with unsubscribe in the subject line.
Other related posts:
