[TechAssist] Re: 1 pound roll solder, 50 feet of chem wick

From: "Hoyt's TV" <hoytstv@xxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Date: Tue, 26 Jul 2005 10:44:09 -0400
See chat list



Russ Hoyt
Hoyt's TV
Exeter, NH


----- Original Message ----- 
From: "John @ Myers TV " <myers_tv_b@xxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Monday, July 25, 2005 9:35 PM
Subject: [TechAssist] Re: 1 pound roll solder, 50 feet of chem wick


> Isn't that harassment? ;-)
>
> John Myers
> Myers TV Service Co.
> 376 E. State St.
> Alliance, OH 44601
>
> Voice / Fax: 330-821-6545
> Myers_tv_b@xxxxxxxxxxxxx
> http://www.myerstv.net
>
> Work as if you were to live a hundred years,
> Pray as if you were to die tomorrow.
>                            Ben Franklin
>
>
>
> Hoyt's TV wrote:
>> Remember the little squeeze bulbs?
>> I always kept a clean one for when I had to go past the secretary's desk, 
>> to
>> blow in her ear.
>>
>> Russ Hoyt
>> Hoyt's TV
>> Exeter, NH
>>
>>
>> ----- Original Message ----- 
>> From: "John @ Myers TV " <myers_tv_b@xxxxxxxxxxxxx>
>> To: <techassist@xxxxxxxxxxxxx>
>> Sent: Sunday, July 24, 2005 1:54 PM
>> Subject: [TechAssist] Re: 1 pound roll solder, 50 feet of chem wick
>>
>>
>>
>>>I met a fellw once who desoldered with freeze spray. He didn't care that
>>>he wound up with blobs of solder all over the board.
>>>
>>>As for me, I swear by solder-wik. I buy it in 50 ft rolls, but splurged
>>>last time for a 100ft roll.
>>>
>>>John Myers
>>>Myers TV Service Co.
>>>376 E. State St.
>>>Alliance, OH 44601
>>>
>>>Voice / Fax: 330-821-6545
>>>Myers_tv_b@xxxxxxxxxxxxx
>>>http://www.myerstv.net
>>>
>>>Work as if you were to live a hundred years,
>>>Pray as if you were to die tomorrow.
>>>                           Ben Franklin
>>>
>>>
>>>
>>>tjanphyl@xxxxxxxxxxxxxxx wrote:
>>>
>>>>I have several of those blue spring loaded desolder tubes you cock on
>>>>your knee and push the button. It sucks flyback pins good,and any
>>>>massive globs and I use wik on the ICs. You know this is like
>>>>anything. Bowling, skeets,baseball,fishing.You can find a dozen guys
>>>>who swear BY one thing, and the other dozen swears AT it. Do what you
>>>>are most efficient with and that's what will make you more money.
>>>>Phil
>>>>
>>>>Phil Bader, Pres.
>>>>Jan Phyl TV Inc
>>>>Winter Haven, Fl
>>>>(863) 299-8821
>>>>estab. 1976
>>>>
>>>>----- Original Message -----
>>>>From: Electric Medic <info@xxxxxxxxxxxxxxxxx>
>>>>Date: Sunday, July 24, 2005 12:31 pm
>>>>Subject: [TechAssist] Re: 1 pound roll solder, 50 feet of chem wick
>>>>
>>>>
>>>>
>>>>>Wayne: I tried those desolder stations one time, it was a Pace. It
>>>>>was blue
>>>>>with a foot pedal and all. Had a long clear hose that ran up to
>>>>>the tool. I
>>>>>was not coordinated enough to use it. I tried and tried to work that
>>>>>contraption, I was running solder all over the board. I couldn't
>>>>>suck and
>>>>>heat at the same time. I would suck after the solder was cool or
>>>>>vice versa.
>>>>>I would melt the plastic tip so the hole was to big then it would
>>>>>slurp up
>>>>>chip components. I wouldn't even try it on those tiny areas where
>>>>>those chip
>>>>>components are everywhere. I remember using it on a tuner that I
>>>>>replaced on
>>>>>some brand and I sucked up a chip resistor and I almost never
>>>>>figured out
>>>>>what was wrong with that set. Plus, I couldn't use it on service
>>>>>calls. I
>>>>>know I waste a lot of wick especially on flybacks, I must have 6"
>>>>>of the
>>>>>stuff hanging with solder on it taking out a flyback, but I am
>>>>>used to it.
>>>>>
>>>>>Perry Bower
>>>>>Electric Medic
>>>>>"It's Cheaper to Keep Her"
>>>>>http://www.electricmedic.com
>>>>>3850 Washington Road  Suite 4C
>>>>>Martinez, Georgia 30907
>>>>>Phone: 706-8MEDIC4  (863-3424)
>>>>>Phone: 706-863-3474
>>>>>Fax: 706-863-2316
>>>>>mailto:info@xxxxxxxxxxxxxxxxx
>>>>>
>>>>>
>>>>>-----Original Message-----
>>>>>From: techassist-bounce@xxxxxxxxxxxxx
>>>>>[mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Wayne Vanaman
>>>>>Sent: Sunday, July 24, 2005 10:49 AM
>>>>>To: techassist@xxxxxxxxxxxxx
>>>>>Subject: [TechAssist] Re: 1 pound roll solder, 50 feet of chem wick
>>>>>
>>>>>
>>>>>Hey Perry, buy a desolder station.
>>>>>I put the date on a 50 foot roll of chem wick when I opened it: 26
>>>>>june2001.  I finished that roll off on 26 June 2005.  Four years.
>>>>>
>>>>>Not only will you spend less on chem wik, desoldering is faster
>>>>>with a
>>>>>desolder station.  I spend about a dollar a month on filters. Much
>>>>>cheaper than chem wik.  It takes about two seconds to desolder a
>>>>>joint,and no damage to the board.
>>>>>
>>>>>If I used two rolls of solder wik a month, 2x$10=$20 $20x48 months=
>>>>>$960.  I bought my solder station for about $1500 in 1993.  That
>>>>
>>>>would
>>>>
>>>>
>>>>>be 144 months times $20 = $2880 minus the $1500= over $1300 savings,
>>>>>plus the time saved.  My solder station was paid for long, long ago.
>>>>>
>>>>>Wayne Vanaman
>>>>>Omega Electronics
>>>>>6904 W Fairfield Dr
>>>>>Pensacola, Fl.  32506-3310
>>>>>
>>>>>Wayne@xxxxxxxxxxxxxxxxxxxxx
>>>>>WWW.PensacolaTVRepair.Com
>>>>>
>>>>>850-456-5995 voice
>>>>>850-458-6369 fax
>>>>>
>>>>>
>>>>>Electric Medic wrote:
>>>>>
>>>>>
>>>>>>Is that correct? 18 Month's for one roll of solder? I never
>>>>>
>>>>>thought about
>>>>>it
>>>>>
>>>>>
>>>>>>and I am not sure how long it takes me to go through a roll. I
>>>>>
>>>>>use off
>>>>>rolls
>>>>>
>>>>>
>>>>>>everywhere, one in my toolbox, one in the truck, and one on each
>>>>>
>>>>>bench. I
>>>>>
>>>>>
>>>>>>know my wife bought about 20 rolls of the stuff sitting up there
>>>>>
>>>>>on the
>>>>>
>>>>>
>>>>>>shelf. I think the parts salesperson talks us into a roll every
>>>>>
>>>>>time we
>>>>>
>>>>>
>>>>>>order parts. That will probably last me 30 years. Hey, I finally
>>>>
>>>>was
>>>>
>>>>
>>>>>>good-newsed, I won't have to by solder again. I can retire on
>>>>>
>>>>>what I have.
>>>>>I
>>>>>
>>>>>
>>>>>>wish the wick would last that long. I must go through those 50'
>>>>>
>>>>>foot white
>>>>>
>>>>>
>>>>>>round ones in 2 weeks.
>>>>>>
>>>>>>Perry Bower
>>>>>>Electric Medic
>>>>>>"It's Cheaper to Keep Her"
>>>>>>http://www.electricmedic.com
>>>>>>3850 Washington Road  Suite 4C
>>>>>>Martinez, Georgia 30907
>>>>>>Phone: 706-8MEDIC4  (863-3424)
>>>>>>Phone: 706-863-3474
>>>>>>Fax: 706-863-2316
>>>>>>mailto:info@xxxxxxxxxxxxxxxxx
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>-------------------------------------------------------------------
>>>>>---------
>>>>>-
>>>>>This Email List is Public. Remove: http://www.tech-
>>>>>assist.org/remove.htmSet Vacation
>>>>>mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
>>>>>Lost Password: http://www.tech-assist.org  and select "Login
>>>>>Problems?".Email Archives:
>>>>>//www.freelists.org/archives/techassist/
>>>>>-------------------------------------------------------------------
>>>>>----------
>>>>>This Email List is Public. Remove: http://www.tech-
>>>>>assist.org/remove.htmSet Vacation
>>>>>mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacationLost
>>>>
>>>>Password: http://www.tech-assist.org  and select "Login Problems?".
>>>>
>>>>
>>>>>Email Archives: //www.freelists.org/archives/techassist/
>>>>>
>>>>
>>>>-----------------------------------------------------------------------------
>>>>This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
>>>>Set Vacation
>>>>mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
>>>>Lost Password: http://www.tech-assist.org  and select "Login Problems?".
>>>>Email Archives: //www.freelists.org/archives/techassist/
>>>>
>>>>
>>>
>>>-----------------------------------------------------------------------------
>>>This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
>>>Set Vacation
>>>mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
>>>Lost Password: http://www.tech-assist.org  and select "Login Problems?".
>>>Email Archives: //www.freelists.org/archives/techassist/
>>>
>>
>>
>>
>> -----------------------------------------------------------------------------
>> This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
>> Set Vacation 
>> mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
>> Lost Password: http://www.tech-assist.org  and select "Login Problems?".
>> Email Archives: //www.freelists.org/archives/techassist/
>>
>>
> -----------------------------------------------------------------------------
> This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
> Set Vacation 
> mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
> Lost Password: http://www.tech-assist.org  and select "Login Problems?".
> Email Archives: //www.freelists.org/archives/techassist/
> 


-----------------------------------------------------------------------------
This Email List is Public. Remove: http://www.tech-assist.org/remove.htm
Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation
Lost Password: http://www.tech-assist.org  and select "Login Problems?".
Email Archives: //www.freelists.org/archives/techassist/
References:
- [TechAssist] Re: 1 pound roll solder, 50 feet of chem wick
  - From: tjanphyl
- [TechAssist] Re: 1 pound roll solder, 50 feet of chem wick
  - From: John @ Myers TV
- [TechAssist] Re: 1 pound roll solder, 50 feet of chem wick
  - From: Hoyt's TV
- [TechAssist] Re: 1 pound roll solder, 50 feet of chem wick
  - From: John @ Myers TV
[TechAssist] Re: 1 pound roll solder, 50 feet of chem wick

Other related posts:
