Hi, Has anyone written a scoot plan which contains 2 UTC demand dependant stages contained within the one scoot stage. I have checked the plan preparation handbook and it only gives the following example which is not suitable for my proposed stage sequence. J01111 001 N01111 {A 0}1, {B 0, AB 2}2, {C 0, AC 2}3 What I hope to achieve is something like this, stage B is a filter which I don't want to extend J01111 001 N01111 (A 0)1, (B 0)2, (look for C, look for D, go back to A)3 Hope this makes sense cheers Securing the future... - Improving services - Enhancing quality of life - Making best use of public resources. The information in this email is solely for the intended recipients. If you are not an intended recipient, you must not disclose, copy, or distribute its contents or use them in any way: please advise the sender immediately and delete this email. Perth & Kinross Council does not warrant that this email or any attachments are virus-free and does not accept any liability for any loss or damage resulting from any virus infection. Perth & Kinross Council may monitor or examine any emails received by its email system. The information contained in this email may not be the views of Perth & Kinross Council. It is possible for email to be falsified and the sender cannot be held responsible for the integrity of the information contained in it. Requests to Perth & Kinross Council under the Freedom of Information (Scotland) Act should be directed to the Freedom of Information Team - email: foi@xxxxxxxxxx General enquiries should be made to enquiries@xxxxxxxxxx or 01738 475000. Securing the future... - Improving services - Enhancing quality of life - Making best use of public resources. ----------------------------------------------------------- A message from the TCUG mailing list. For information about the list visit //www.freelists.org/webpage/tcug