I was planning on going but some how I got the wrong dates, I didn't find out until today it was this weekend. I will make every effort to go to Psycoblooie this year. I had planned on going last year but at the last min. work screwed it all up. ----- Original Message ----- From: Denis Dodson To: tcb@xxxxxxxxxxxxx Sent: Wednesday, April 14, 2010 7:45 PM Subject: [tcb] Re: Heater Valve You won't be at the Classic? Another reason I'm not going. Nah, I'll go anyway. Just too much fun to miss out on. Do you have Psycoblooie blocked out? From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf Of Fred McDonald Sent: Wednesday, April 14, 2010 5:32 PM To: tcb@xxxxxxxxxxxxx Subject: [tcb] Re: Heater Valve I have a knob the pin is important. I will not be at the classic so I don't know how I'll be able to see the unit. ----- Original Message ----- From: Bergman To: tcb@xxxxxxxxxxxxx Sent: Wednesday, April 14, 2010 12:29 PM Subject: [tcb] Re: Heater Valve It's all there. I will have it with me and you can look at it and decide. The missing piece does not affect the pin holding the knob on. Someone else might have a knob in better condition. ---------------------------------------------------------------------------- From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf Of Fred McDonald Sent: Wednesday, April 14, 2010 12:08 PM To: tcb@xxxxxxxxxxxxx Subject: [tcb] Re: Heater Valve Lyle says I need a complete unit with an intact knob with the pin that holds the knob. ----- Original Message ----- From: Bergman To: tcb@xxxxxxxxxxxxx Sent: Wednesday, April 14, 2010 11:23 AM Subject: [tcb] Re: Heater Valve What I got is all here but the knob has a chip out of it on the underside -------------------------------------------------------------------------- From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf Of Denis Dodson Sent: Wednesday, April 14, 2010 10:58 AM To: tcb@xxxxxxxxxxxxx Subject: [tcb] Re: Heater Valve Do you have that for him? Because I can dig one up, but if you will bring it to him I won't have to. From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf Of Bergman Sent: Wednesday, April 14, 2010 10:44 AM To: tcb@xxxxxxxxxxxxx Subject: [tcb] Re: Heater Valve I am guessing you mean the knob and "guts" that pull the cable? I got that. -------------------------------------------------------------------------- From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf Of Fred McDonald Sent: Wednesday, April 14, 2010 10:38 AM To: tcb@xxxxxxxxxxxxx Subject: [tcb] Heater Valve I have been trying to complete the stock heating system on my bus. I have everything connected but the heater valve in the cab you use to open & close the system needs to be replaced. I need a complete working valve including the handle. Lyle Cherry has been working on this for me but is not been able to find one. He thinks the beetle & bus are the same.