[tcb] Re: Heater Valve
- From: "Fred McDonald" <texasbluebus@xxxxxxxxx>
- To: <tcb@xxxxxxxxxxxxx>
- Date: Wed, 14 Apr 2010 17:31:40 -0500
I have a knob the pin is important. I will not be at the classic so I don't
know how I'll be able to see the unit.
----- Original Message -----
From: Bergman
To: tcb@xxxxxxxxxxxxx
Sent: Wednesday, April 14, 2010 12:29 PM
Subject: [tcb] Re: Heater Valve
It's all there. I will have it with me and you can look at it and decide. The
missing piece does not affect the pin holding the knob on. Someone else might
have a knob in better condition.
------------------------------------------------------------------------------
From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf Of
Fred McDonald
Sent: Wednesday, April 14, 2010 12:08 PM
To: tcb@xxxxxxxxxxxxx
Subject: [tcb] Re: Heater Valve
Lyle says I need a complete unit with an intact knob with the pin that holds
the knob.
----- Original Message -----
From: Bergman
To: tcb@xxxxxxxxxxxxx
Sent: Wednesday, April 14, 2010 11:23 AM
Subject: [tcb] Re: Heater Valve
What I got is all here but the knob has a chip out of it on the underside
----------------------------------------------------------------------------
From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf
Of Denis Dodson
Sent: Wednesday, April 14, 2010 10:58 AM
To: tcb@xxxxxxxxxxxxx
Subject: [tcb] Re: Heater Valve
Do you have that for him? Because I can dig one up, but if you will bring
it to him I won't have to.
From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf
Of Bergman
Sent: Wednesday, April 14, 2010 10:44 AM
To: tcb@xxxxxxxxxxxxx
Subject: [tcb] Re: Heater Valve
I am guessing you mean the knob and "guts" that pull the cable? I got that.
----------------------------------------------------------------------------
From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf
Of Fred McDonald
Sent: Wednesday, April 14, 2010 10:38 AM
To: tcb@xxxxxxxxxxxxx
Subject: [tcb] Heater Valve
I have been trying to complete the stock heating system on my bus. I have
everything connected but the heater valve in the cab you use to open & close
the system needs to be replaced.
I need a complete working valve including the handle.
Lyle Cherry has been working on this for me but is not been able to find
one. He thinks the beetle & bus are the same.
Other related posts:
