[tcb] Re: Heater Valve
- From: "Denis Dodson" <coocoo@xxxxxxx>
- To: <tcb@xxxxxxxxxxxxx>
- Date: Wed, 14 Apr 2010 19:45:31 -0500
You won't be at the Classic? Another reason I'm not going. Nah, I'll go
anyway. Just too much fun to miss out on. Do you have Psycoblooie blocked
out?
From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf
Of Fred McDonald
Sent: Wednesday, April 14, 2010 5:32 PM
To: tcb@xxxxxxxxxxxxx
Subject: [tcb] Re: Heater Valve
I have a knob the pin is important. I will not be at the classic so I don't
know how I'll be able to see the unit.
----- Original Message -----
From: Bergman <mailto:bergmanfamily@xxxxxxxxxxxxx>
To: tcb@xxxxxxxxxxxxx
Sent: Wednesday, April 14, 2010 12:29 PM
Subject: [tcb] Re: Heater Valve
It's all there. I will have it with me and you can look at it and decide.
The missing piece does not affect the pin holding the knob on. Someone else
might have a knob in better condition.
_____
From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf
Of Fred McDonald
Sent: Wednesday, April 14, 2010 12:08 PM
To: tcb@xxxxxxxxxxxxx
Subject: [tcb] Re: Heater Valve
Lyle says I need a complete unit with an intact knob with the pin that holds
the knob.
----- Original Message -----
From: Bergman <mailto:bergmanfamily@xxxxxxxxxxxxx>
To: tcb@xxxxxxxxxxxxx
Sent: Wednesday, April 14, 2010 11:23 AM
Subject: [tcb] Re: Heater Valve
What I got is all here but the knob has a chip out of it on the underside
_____
From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf
Of Denis Dodson
Sent: Wednesday, April 14, 2010 10:58 AM
To: tcb@xxxxxxxxxxxxx
Subject: [tcb] Re: Heater Valve
Do you have that for him? Because I can dig one up, but if you will bring it
to him I won't have to.
From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf
Of Bergman
Sent: Wednesday, April 14, 2010 10:44 AM
To: tcb@xxxxxxxxxxxxx
Subject: [tcb] Re: Heater Valve
I am guessing you mean the knob and "guts" that pull the cable? I got that.
_____
From: tcb-bounce@xxxxxxxxxxxxx [mailto:tcb-bounce@xxxxxxxxxxxxx] On Behalf
Of Fred McDonald
Sent: Wednesday, April 14, 2010 10:38 AM
To: tcb@xxxxxxxxxxxxx
Subject: [tcb] Heater Valve
I have been trying to complete the stock heating system on my bus. I have
everything connected but the heater valve in the cab you use to open & close
the system needs to be replaced.
I need a complete working valve including the handle.
Lyle Cherry has been working on this for me but is not been able to find
one. He thinks the beetle & bus are the same.
Other related posts:
