Hi folks, I am doing a source synchronous simulation. I am using custom measurements feature in SQ. I have written custom measurements for the setup and hold time measurements. when I run the simulation I get the warning " wave form has less than the required 10 cycles" since I am measuring the setup and hold for 10 cycles at the reciever. when I look at the wave form the simulation is running for more than 10 cycles. Also I am not getting any values for the custom measurements I have written. All I get is NA for all the columns. I would really appreciate if some one can help me find the source of the problem. Thanks, Josna. 2,000,000,000 Web Pages--you only need 1. Save time with My Lycos. http://my.lycos.com ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu