[SI-LIST] Re: SQ Question.
- From: "Issa, Elie" <Elie.Issa@xxxxxxxxxx>
- To: <signalguy@xxxxxxxxx>, <si-list@xxxxxxxxxxxxx>,<whizplayer@xxxxxxxxx>
- Date: Thu, 14 Mar 2002 13:10:24 -0600
Try to check your Fixed Duration variable if it is selected. Is it set
on the default 25ns? =20
If it is, either increase it or simply desselect it? =20
Elie
-----Original Message-----
From: fname lname [mailto:signalguy@xxxxxxxxx]
Sent: Thursday, March 14, 2002 12:09 PM
To: signalguy@xxxxxxxxx; si-list@xxxxxxxxxxxxx; whizplayer@xxxxxxxxx
Subject: [SI-LIST] Re: SQ Question.
Hi Bob,
Thanks for the reply. I have the strobes setup. Thats not the source of
the warning. when driving I am using pulse stimulus for my strobe and
custom stimulus for the data driver. At the receiver I am tristating my
buffers. Also the simulation is running fine and I am seeing the wave
forms at the reciever end but all I am having is NA in the custom
measurements that I have written. I have my ref voltages setup properly
too. I would really appreciate any suggestions.
Thanks,
Josna.
>Hi! You need to set up the Strobes for doing setup &
>Hold time measurement. Since you have written the
>custom measurement, all you need to do is go
>SET-->Strobe and in the window that appears slect the
>clock or strobe that you are using to make setup &
>hold time measurements as Strobe & the other two/three
>data pins as Data pins. After you do that you will see
>pulse symbols getting assigned to your topology.=20
>Bob
>--- fname lname <signalguy@xxxxxxxxx> wrote:
>>=20
>> =20
>> Hi folks,
>> I am doing a source synchronous simulation. I am
>> using custom measurements feature in SQ. I have
>> written custom measurements for the setup and hold
>> time measurements. when I run the simulation I get
>> the warning " wave form has less than the required
>> 10 cycles" since I am measuring the setup and hold
>> for 10 cycles at the reciever. when I look at the
>> wave form the simulation is running for more than 10
>> cycles. Also I am not getting any values for the
>> custom measurements I have written. All I get is NA
>> for all the columns. I would really appreciate if
>> some one can help me find the source of the problem.
>>=20
>> Thanks,
>> Josna.
>>=20
>>=20
>>=20
>>=20
>> 2,000,000,000 Web Pages--you only need 1. Save time
>> with My Lycos.
>> http://my.lycos.com
>>
>------------------------------------------------------------------
>> To unsubscribe from si-list:
>> si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in
>> the Subject field
>>=20
>> or to administer your membership from a web page, go
>> to:
>> //www.freelists.org/webpage/si-list
>>=20
>> For help:
>> si-list-request@xxxxxxxxxxxxx with 'help' in the
>> Subject field
>>=20
>> List archives are viewable at: =20
>> //www.freelists.org/archives/si-list
>> or at our remote archives:
>> http://groups.yahoo.com/group/si-list/messages=20
>> Old (prior to June 6, 2001) list archives are
>> viewable at:
>> http://www.qsl.net/wb6tpu
>> =20
>>=20
>
>
>__________________________________________________
>Do You Yahoo!?
>Yahoo! Sports - live college hoops coverage
>http://sports.yahoo.com/
>------------------------------------------------------------------
>To unsubscribe from si-list:
>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
>or to administer your membership from a web page, go to:
>//www.freelists.org/webpage/si-list
>
>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>List archives are viewable at: =20
> //www.freelists.org/archives/si-list
>or at our remote archives:
> http://groups.yahoo.com/group/si-list/messages=20
>Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
> =20
>
>
2,000,000,000 Web Pages--you only need 1. Save time with My Lycos.
http://my.lycos.com
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at: =20
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages=20
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
=20
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
