Hi ! Thanks for all answer me Kim, Mitch ( nice joke :) and Jeff. Do you know what parameters of soldermask ? Now I know that possible edit material.dat and now I need to do this. Uri -----Original Message----- From: Jeff Seeger [mailto:jseeger@xxxxxxxxxxxxxx] Sent: Wednesday, February 18, 2004 8:38 PM To: si-list@xxxxxxxxxxxxx Subject: [SI-LIST] Re: Layout Cross Section Uri Chaplianka wrote: > > snip < > I can change layer AIR in Subclasses/Etch to other material like FR-4 > (no SOLDERMASK ) but not exist possibility to enter Er and Lost > Tangent. Uri, Other pertinent options can be selected; "conformal coat" would equate to soldermask, and "polyimide film" would equate to a flex or rigid/flex coverlayer. These will accept Er values. HTH, -- Jeff Seeger Applied CAD Knowledge Inc Chief Technical Officer Tyngsboro, MA 01879 jseeger "at" appliedcad "dot" com 978 649 9800 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu