Can you please define "better results" ? Are they obtained in simulation or design validation ? -----Original Message----- From: Gupta, Naveen [mailto:naveen@xxxxxxxxx] Sent: Friday, August 30, 2002 10:46 AM To: 'si-list@xxxxxxxxxxxxx' Subject: [SI-LIST] GTL buffers Vref Hi all, I have a basic question about the Vref for GTL input buffers. If the Vref spec states a 1.0 Volts, but better results are obtained at a lower voltage, what should be the issues one should examine. Relatedly, if better results in turn are obtained at a higher voltage, then what should one examine? Thanks for your answers. Thanks, Naveen ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu