[rollei_list] Re: question on operating and on screen for Rollei GX and Hood
- From: Eric Goldstein <egoldste@xxxxxxxxxxxxx>
- To: rollei_list@xxxxxxxxxxxxx
- Date: Thu, 19 May 2005 09:36:19 -0400 (GMT-04:00)
Actually, there is quite a bit of resistence on these shutters in selecting
1/500th even if the shutter is not tensioned, because you are
engaging/tentioning an aux spring to get you to this high speed.
It's important to emphasize Carlo's advice... DO NOT MOVE the shutter speed
dial to 1/500th if the shutter is cocked.
Eric Goldstein
-----Original Message-----
From: Carlos Manuel Freaza <cmfreaza@xxxxxxxxxxxx>
Sent: May 19, 2005 9:28 AM
To: rollei_list@xxxxxxxxxxxxx
Subject: [rollei_list] Re: question on operating and on screen for Rollei GX
and Hood
Hello:
1)I don't know your problem moving the shuuter speed
selector wheel to 1/500, however it's normal for the
Automat Compur shutter that you'll find a strong
resistence to select 1/500 if the shutter is
cocked,you need to select it before to cock the
shutter.
---
Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list
Other related posts:
