Here's another source... SO very flat according to them: http://www.jaycar.com.au/images_uploaded/battprim.pdf Eric Goldstein -- On Wed, Mar 3, 2010 at 6:00 PM, Eric Goldstein <egoldste@xxxxxxxxx> wrote: > Hi Stephen/Richard - > > Here is one source (watch applications) to judge for yourself: > > http://members.iinet.net.au/~fotoplot/accbatcc.htm#dc > > Eric Goldstein > > On Wed, Mar 3, 2010 at 5:52 PM, <stephen@xxxxxxxxxxxxxxxxxx> wrote: >> Hi Richard: >> >> You are correct, silver does not have as flat a discharge curve as mercury. >> >> In practice, though, it hardly matters. I even use 1.5v alkalines in my >> original Photomic. Horrors! >> >> -----Original Message----- >> From: Richard Knoppow [mailto:dickburk@xxxxxxxxxxxxx] >> Sent: Wednesday, March 3, 2010 02:50 AM >> To: rollei_list@xxxxxxxxxxxxx >> Subject: [rollei_list] Re: Hearing Aid Batteries in Nikon F >> >> ----- Original Message ----- From: "Stephen Attaway" To: Sent: Tuesday, >> March 02, 2010 8:04 PM Subject: [rollei_list] Re: Hearing Aid Batteries in >> Nikon F > Hi Richard: > > If you send your Nikon F to Robert Decker >> (drwyn@xxxxxxx), > he can convert it to use 1.5v silver cells. > > I've had >> him do several of my oldies and they work fine. > --- > Rollei List Thanks >> for the tip. I am not sure whether silver oxide cells have as flat a voltage >> characteristic as zinc air cells. It is the constancy of voltage which is >> important. Very few of the devices that use mercury cells have any sort of >> voltage regulation in them; they depend on the properties of the mercury >> cell. If the voltage is not constant adjusting the meter to read right with >> a fresh cell means it will drift off as the voltage drops. My research on >> currently available cells indicates that the zinc-air cell comes closes to >> the mercury cell in the flatness of its voltage output. It is simply not as >> long lived. Mercury cells were used in some peculiar applications. A common >> one was as bias cells in electronic equipment which ran on batteries. >> Obtaining the bias from the cell allowed more of the main battery voltage to >> be applied elsewhere. These cells were often soldered in because they >> operated with essentially no load and would last for decades. -- Richard >> Knoppow Los Angeles, CA, USA dickburk@xxxxxxxxxxxxx --- Rollei List - Post >> to rollei_list@xxxxxxxxxxxxx - Subscribe at >> rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR >> by logging into www.freelists.org - Unsubscribe at >> rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR >> by logging into www.freelists.org - Online, searchable archives are >> available at //www.freelists.org/archives/rollei_list > --- Rollei List - Post to rollei_list@xxxxxxxxxxxxx - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org - Online, searchable archives are available at //www.freelists.org/archives/rollei_list