At 03:56 PM 8/2/2010, CarlosMFreaza wrote: >2010/8/2 Hauke Fath <hauke@xxxxxxxxxxxxxxxxxxxxxxxx>: >> The pre-war Contax spool I have here has both a symmetrical middle slot, to >> which you'd have to tailor modern film leaders, and a longer, asymmetric, >> wave-formed slot. The latter would, I guess, work perfectly with today's >> film leader shape. > >Yes, that is my spool too; thanks to Marc post I read again the >instructions to load the Contax II with 35mm cartridges and discovered >that my taking spool has the longer wave-formed slot like you >described, however this slot external part is broken close to the >basis for my spool, the regular film leader has almost nothing to >held it in the spool and then I only can use the shorter slot by >trimming the film leader. >Anyway this is not a serious problem, if you think to shoot a lot of >film you only need to prepare the film leaders, it's a touch to trim >them after you got practice. Carlos You might check my FS listings on Friday .... Marc msmall@xxxxxxxxxxxx Cha robh bàs fir gun ghràs fir! --- Rollei List - Post to rollei_list@xxxxxxxxxxxxx - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org - Online, searchable archives are available at //www.freelists.org/archives/rollei_list