[pure-silver] Re: Spotting and Microscope Questions

  • From: "Richard Knoppow" <dickburk@xxxxxxxxxxxxx>
  • To: <pure-silver@xxxxxxxxxxxxx>
  • Date: Tue, 12 Oct 2004 13:57:58 -0700

----- Original Message ----- 
From: "Koch, Gerald" <gkoch02@xxxxxxxxxx>
To: <pure-silver@xxxxxxxxxxxxx>
Sent: Tuesday, October 12, 2004 12:51 PM
Subject: [pure-silver] Re: Spotting and Microscope Questions


> Scratching shouldn't be a problem since the toothpick 
> isn't moved from side to
> side but rather brought down vertically until it just 
> contacts the paper and
> deposits a droplet of iodine solution.  A razor blade can 
> be used to make a
> finer point on the toothpick.  Even if a brush is used it 
> too should be used
> with a vertical rather than a side to side motion.
>
> The spotting dye should be very dilute and density built 
> up slowly with several
> applications.  Mix the dye on an old white plate.  Unused 
> dye can be allowed to
> dry on the plate and re-dissolved with a small amount of 
> distilled water
> whenever needed.  This saves time since you don't have to 
> re-mix each time.  If
> you have to fine-tune the color use a toothpick or brush 
> to add a small amount
> of another color rather than using an dropper.  Store the 
> plate with it's dye in
> a ziplock bag.  Many expert spotters swear that spit is 
> better than water.
>
> Spotting dyes are like any other dyes in that they will 
> fade over time when
> exposed to light.
>
> When you get into magnifications greater than that of a 
> hand lense hand-eye
> coordination becomes a problem.
>
> Jerry
>
   To make a fine point on a toothpick use the same 
technique used on drawing pencils, a small card with fine 
sandpaper on it. This is more controllable.

---
Richard Knoppow
Los Angeles, CA, USA
dickburk@xxxxxxxxxxxxx 

=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: