I¹m preparing a piece on mounting and matting, and studying much existing literature on the subject, I ran across many confusing terms. Trying to makes sense of all of them and trying to define some standard terms, I came up with the following descriptions. ***** Mounting board, matting board and backing board are terms, referring to the ?raw¹, stationery materials used. Mount-board, mat-board and backboard are usable sheets, cut to size from the above materials, and removing the window opening from the mat-board, turns it lastly into a functional ?window¹ over-mat or just a mat. Mount is a general term, referring to the mounting style or the entire assembly but without the frame. ***** Any opinions, or are these generally acceptable and understandable? Regards Ralph W. Lambrecht ============================================================================================================= To unsubscribe from this list, go to www.freelists.org and logon to your account (the same e-mail address and password you set-up when you subscribed,) and unsubscribe from there.