[pskmail] Re: Connection problems on 10146 Dial
- From: John Douyere <vk2eta@xxxxxxxxx>
- To: pskmail@xxxxxxxxxxxxx
- Date: Thu, 19 Aug 2010 06:24:43 +1000
Hello Franco,
Reading the log, one of your connection requests was received
correctly but the server call sign was missing the "-3" at the end: it
should have been IS0GRB-3 instead of IS0GRB. You should get a connect
then, no problems.
Also, the other connection request was not received correctly (QRM or
other) so I suggest you try a slower mode for the connection like
psk250R if you were using psk500R. In any case the server will adjust
the mode up if the signal quality is good.
Good luck,
73, John
On Thu, Aug 19, 2010 at 6:09 AM, Franco Spinelli <frspin@xxxxxxxxx> wrote:
> I am testing PSKMail with my new FT-897D and using IS0GRB server
>
> My test was 2010-08-18 at 19Z approx
>
> I send a ping without answer
> I send a beacon at 19:26Z and get a QSL from IS0GRB-3 - On online log
> (www.pskmail.it) I can see my message as RX from server
> I send a connection request at 19:31Z, 19:32Z and 19:43Z - On online log I
> can see my message as RX but no answer from server.
>
> My test hardware is:
>
> - EeePC 1000
> - Connection from internal audio to TX
> - FT-897D with 70-80W
> - Zeppelin antenna directed approx Nord-Sud
> - MFJ-945E tuner
>
> Where is my mistake?
>
> Regards
>
> Franco Spinelli
> IW2DHW
>
>
>
Other related posts:
