[overture] Re: Building v24 on Blue Gene P

Thanks, Eric. That was the problem.

I have a new failure below. 

But first, I got around the A++.h not found error by setting:

CC_INCLUDES_FOR_DEPEND =  $(Include) $(OverturePrecision) -DUSE_MESA 
-I$(APlusPlus)/include -I$(OpenGL)/include $(BOXLIB_DEFS)

in MakeDefs.bgp (only the APlusPlus bit is relevent to this problem, I think). 
However, I noticed that the build had warnings about "8" and "4" compiler 
options. I determined that those warnings originated from the following code in 
the configure script:

$FortranDouble = "-r8 -i4";

The warnings disappeared after adding the following to the configure script:

if( $machine eq "bgp" && $double ne "" )
{
  $FortranDouble = "";
}

After a substantial amount of mpixlf77_r compiling, the build failed in the 
mpixlcc_r section with:

mpixlcxx_r -DHAVE_CONFIG_H -I. 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../.. 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include
 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../PARTI
 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../PARTI
 -I/include    
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../PADRE/src
 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../PADRE
 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../PARTI
 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../PARTI
 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../PADRE/PGSLIB
 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../PADRE/PGSLIB
 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../PGSLIB
 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../PGSLIB
 -O  -fPIC -Wno-deprecated -c partitioning.C
bgxlC_r: 1501-216 (W) command option -fPIC is not recognized - passed to ld
bgxlC_r: 1501-210 (S) command option Wno-deprecated contains an incorrect 
subargument
make[1]: *** [partitioning.o] Error 40
make[1]: Leaving directory 
`/gpfs/home/jpbernst/Code/Overture/Overture.v24/GridFunction'
make: *** [all] Error 2

I tried adding the following to the configure script:

if( $machine eq "bgp" && $double ne "" )
{
  $cppFlags="";    # Flags needed for C++
  $ccFlags="";     # Flags needs for C
  $fortranFlags=""; # Flags needed for fortran
}

That did not fix the issue. I discovered that the flags in question were 
hardwired in GridFunction/Makefile.in. Removing the flags and reconfiguring got 
around the error. 

Still during mpixlcc_r compilation, the build next failed with the errors below:
 
"partitioning.C", line 204.43: 1540-0256 (S) A parameter of type 
"std::vector<int,std::allocator<int> > &" cannot be initialized with an 
expression of type "int *".
"partitioning.C", line 204.43: 1540-1205 (I) The error occurred while 
converting to parameter 1 of 
"PADRE_Distribution<BaseArray,Array_Domain_Type,SerialArray_Domain_Type>::getProcessorSet(ProcessorSet
 &) const".

Any thoughts on those? I have not been able to find the cause.

Full make error output:

mpixlcxx_r -DHAVE_CONFIG_H -I. 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../.. 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include
 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../PARTI
 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../PARTI
 -I/include    
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../PADRE/src
 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../PADRE
 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../PARTI
 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../PARTI
 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../PADRE/PGSLIB
 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../PADRE/PGSLIB
 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../PGSLIB
 
-I/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../PGSLIB
 -O  -c partitioning.C
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/A++.h",
 line 1405.21: 1540-1091 (W) The friend declaration "APP_view" specifies a 
default argument expression and is not a definition.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/A++.h",
 line 1406.21: 1540-1091 (W) The friend declaration "APP_display" specifies a 
default argument expression and is not a definition.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/A++.h",
 line 4044.21: 1540-1091 (W) The friend declaration "APP_view" specifies a 
default argument expression and is not a definition.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/A++.h",
 line 4045.21: 1540-1091 (W) The friend declaration "APP_display" specifies a 
default argument expression and is not a definition.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/A++.h",
 line 6683.21: 1540-1091 (W) The friend declaration "APP_view" specifies a 
default argument expression and is not a definition.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/A++.h",
 line 6684.21: 1540-1091 (W) The friend declaration "APP_display" specifies a 
default argument expression and is not a definition.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/P++.h",
 line 1339.21: 1540-1091 (W) The friend declaration "APP_view" specifies a 
default argument expression and is not a definition.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/P++.h",
 line 1340.21: 1540-1091 (W) The friend declaration "APP_display" specifies a 
default argument expression and is not a definition.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/P++.h",
 line 3978.21: 1540-1091 (W) The friend declaration "APP_view" specifies a 
default argument expression and is not a definition.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/P++.h",
 line 3979.21: 1540-1091 (W) The friend declaration "APP_display" specifies a 
default argument expression and is not a definition.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/P++.h",
 line 6617.21: 1540-1091 (W) The friend declaration "APP_view" specifies a 
default argument expression and is not a definition.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/P++.h",
 line 6618.21: 1540-1091 (W) The friend declaration "APP_display" specifies a 
default argument expression and is not a definition.
"partitioning.C", line 204.43: 1540-0256 (S) A parameter of type 
"std::vector<int,std::allocator<int> > &" cannot be initialized with an 
expression of type "int *".
"partitioning.C", line 204.43: 1540-1205 (I) The error occurred while 
converting to parameter 1 of 
"PADRE_Distribution<BaseArray,Array_Domain_Type,SerialArray_Domain_Type>::getProcessorSet(ProcessorSet
 &) const".
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/p_inline_func.h",
 line 465.12: 1540-1103 (W) The address of a local variable or temporary is 
used in a return expression.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/p_inline_func.h",
 line 589.12: 1540-1103 (W) The address of a local variable or temporary is 
used in a return expression.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/p_inline_func.h",
 line 725.12: 1540-1103 (W) The address of a local variable or temporary is 
used in a return expression.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/p_inline_func.h",
 line 873.12: 1540-1103 (W) The address of a local variable or temporary is 
used in a return expression.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/p_inline_func.h",
 line 1027.12: 1540-1103 (W) The address of a local variable or temporary is 
used in a return expression.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/p_inline_func.h",
 line 1190.12: 1540-1103 (W) The address of a local variable or temporary is 
used in a return expression.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/p_inline_func.h",
 line 2298.12: 1540-1103 (W) The address of a local variable or temporary is 
used in a return expression.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/p_inline_func.h",
 line 2422.12: 1540-1103 (W) The address of a local variable or temporary is 
used in a return expression.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/p_inline_func.h",
 line 2558.12: 1540-1103 (W) The address of a local variable or temporary is 
used in a return expression.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/p_inline_func.h",
 line 2706.12: 1540-1103 (W) The address of a local variable or temporary is 
used in a return expression.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/p_inline_func.h",
 line 2860.12: 1540-1103 (W) The address of a local variable or temporary is 
used in a return expression.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/p_inline_func.h",
 line 3023.12: 1540-1103 (W) The address of a local variable or temporary is 
used in a return expression.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/p_inline_func.h",
 line 4131.12: 1540-1103 (W) The address of a local variable or temporary is 
used in a return expression.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/p_inline_func.h",
 line 4255.12: 1540-1103 (W) The address of a local variable or temporary is 
used in a return expression.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/p_inline_func.h",
 line 4391.12: 1540-1103 (W) The address of a local variable or temporary is 
used in a return expression.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/p_inline_func.h",
 line 4539.12: 1540-1103 (W) The address of a local variable or temporary is 
used in a return expression.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/p_inline_func.h",
 line 4693.12: 1540-1103 (W) The address of a local variable or temporary is 
used in a return expression.
"/home/jpbernst/Code/Overture/A++P++-0.8.0/P++/install/../src/array_src/../../include/p_inline_func.h",
 line 4856.12: 1540-1103 (W) The address of a local variable or temporary is 
used in a return expression.
make[1]: *** [partitioning.o] Error 1
make[1]: Leaving directory 
`/gpfs/home/jpbernst/Code/Overture/Overture.v24/GridFunction'
make: *** [all] Error 2

----- Original Message -----
From: "Erik Wilson" <wilsone@xxxxxx>
To: overture@xxxxxxxxxxxxx
Sent: Tuesday, April 24, 2012 4:56:35 PM
Subject: [overture] Re: Building v24 on Blue Gene P


Hi Joe,

It looks like CC_INCLUDES_FOR_DEPEND may be edited & different than a
vanilla linux MakeDefs.

Cheers,
 -Erik

> Thanks, Bill.
>
> Below is the MakeDefs file that I am using that is based on the
> MakeDefs.linux file that came with Overture.v24. The Include variable
> setting, indeed, does not include A++. Adding a -I pointing to
> $(APlusPlus/include) results in other immediate problems. Can you please
> send me a MakeDefs file for vanilla linux that is known working?
>
> Thanks,
>
> Joe
>
> +++++MakeDefs.bgp (based on MakeDefs.linux+++++
>
> # linux with dynamic libraries
>
> # these next values for compilers will be used unless overridden with an
> argument to configure
> cc = mpixlc_r
> CC = mpixlcxx_r
> FC = mprixlf77_r
>
> # On some 64-bit machines some libraries are in lib64 instead of lib
> # this next line will be changed by the configure script
> LIB64 = lib
>
> # Here is the rpath command
> OV_RPATH = -Wl,-rpath,
> #xlc OV_RPATH = -R
>
> # these next lines will be changed by the configure script
> USE_DOUBLE_OR_SINGLE = -DOV_USE_FLOAT
> #xlc USE_DOUBLE_OR_SINGLE = -WF,-DOV_USE_FLOAT
>
> A++ = $(APlusPlus)
> A+++ = $(APlusPlus)
> # AppLibraries = -L$(APlusPlus) -lA++ -lA++_static
> AppLibraries = $(OV_RPATH)$(APlusPlus)/lib -L$(APlusPlus)/lib -lApp
> -lApp_static
>
> Include=  -I$(Overture)/include -I.
> Lib=      $(Overture)/lib
> LibOverture= -lOverture -lOverture_static
> # Make 2 dynamic libs for ibm:
> #xlc LibOverture= -lOverture1 -lOverture2 -lOverture_static
> LibRapsodi= -lRapsodi -lRapsodi_static
> BOXLIB_DEFS = -DBL_USE_FLOAT -DBL_Solaris
>
> # these next flags are compiler dependent
> # *** WARNING *** these next lines are changed by the configure script
> cc_FLAGS = -qarch=450d -qtune=450 -qmaxmem=16384
> CC_FLAGS = -qarch=450d -qtune=450 -qmaxmem=16384
> FF_FLAGS = -qarch=450d -qtune=450 -qmaxmem=16384
>
> # Turn off warnings from intel f95 compiler
> #ifc FF_FLAGS = -fPIC -w
>
> # these next values will may be changed by the configure script
> C_OPTIMIZATION_FLAG = -O
> CPP_OPTIMIZATION_FLAG = -O
> FORTRAN_OPTIMIZATION_FLAG = -g
>
> # Use this next flag to optimize files that Bill likes to by default
> compile optimized
> STD_OPT_FLAG = -O
>
> CFLAGS =  $(cc_FLAGS)  $(Include) $(OverturePrecision)
> $(C_OPTIMIZATION_FLAG) -DSHM
> # flags for c routines we always optimize (except if debug is on)
> CFLAGSO =  $(STD_OPT_FLAG) $(cc_FLAGS)  $(Include) $(OverturePrecision)
> -DSHM
>
> # do not include some paths, such as STL in the places searched by
> makedepend (takes too long)
> #*wdh*  temporarily add -Wno-deprecated -- fix these later
> # ** CC_INCLUDES_FOR_DEPEND =  $(Include) $(OverturePrecision)
> -I$(APlusPlus)/include $(BOXLIB_DEFS) -Wno-deprecated
> CC_INCLUDES_FOR_DEPEND =  $(Include) $(OverturePrecision) $(BOXLIB_DEFS)
>
> STL_INCLUDE =
> #  HAS_MODFL_PROTO is for a perl compile error of OvertureParser.C for gcc
> 3.4.3
> # CC_INCLUDES = $(CC_FLAGS) $(CC_INCLUDES_FOR_DEPEND) $(STL_INCLUDE)
> # CC_FLAGS = -fPIC -DHAS_MODFL_PROTO
> # wdh 081212 -- remove HAS_MODFL_PROTO since it fails with xlc
> CC_INCLUDES = $(CC_FLAGS) $(CC_INCLUDES_FOR_DEPEND) $(STL_INCLUDE)
> #CC_FLAGS = -fPIC
>
> CCFLAGS= $(CC_INCLUDES) $(CPP_OPTIMIZATION_FLAG)
>
> # things that are always compiled with optimization use this flag (except
> if debug is on)
> CCFLAGSO= $(CC_INCLUDES) $(STD_OPT_FLAG)
>
> # things that are always compiled with lots of optimization use this flag
> (except if debug is on)
> CCFLAGSF= $(CC_INCLUDES) $(STD_OPT_FLAG)
>
> # things that need to be compiled with no optimization use the following
> CCFLAGSG= $(CC_INCLUDES) -g
>
> # Notes: There seems to be problems using -O with g77
> #        Some older versions of the egcs compiler also had trouble with
> -fPIC, removing it seemed to work.
> FFLAGS=    $(FF_FLAGS) $(OverturePrecision)  $(FortranDouble)
> $(FORTRAN_OPTIMIZATION_FLAG) $(Include)
> # single precision always:
> FFLAGSS=  $(FF_FLAGS) $(OverturePrecision) $(FORTRAN_OPTIMIZATION_FLAG)
> $(Include)
> FFLAGSSO = ${FF_FLAGS} $(OverturePrecision) $(Include) $(STD_OPT_FLAG)
> FFLAGSO = $(FF_FLAGS) $(OverturePrecision) $(FortranDouble)
> $(STD_OPT_FLAG) $(Include)
> FFLAGSG = $(FF_FLAGS) $(OverturePrecision) $(FortranDouble) -g $(Include)
> FFLAGSG2 = $(FF_FLAGS) $(OverturePrecision) $(FortranDouble) -g $(Include)
> # The ifort compiler can take for-ever if we use -g so use -O instead
> #ifort FFLAGSG = $(FF_FLAGS) $(OverturePrecision) $(FortranDouble) -O
> $(Include)
>
> # things that are always compile with optimization use these flags (except
> if debug is on)
> FFLAGSO= $(STD_OPT_FLAG) $(FF_FLAGS) $(OverturePrecision) $(FortranDouble)
>  $(FLAGS) $(Include)
> FFLAGSSO= $(STD_OPT_FLAG) $(OverturePrecision) $(FF_FLAGS)  $(FLAGS)
> $(Include)
>
> # Here we add a path to the compiler lib directory (this is sometimes
> needed so that we find the correct
> # version of the compiler libraries if they are different from the the
> ones in /usr/lib for e.g.)
> OV_COMPILER_LIBS = $(OV_RPATH)$(COMPILER_LIB_DIRECTORY)
> -L$(COMPILER_LIB_DIRECTORY)
>
> # here are the hdf libraries (the configure script will change this line
> for use with hdf5)
> HDF_LIBS = $(OV_RPATH)$(HDF)/lib -L$(HDF)/lib -lmfhdf -ldf -ljpeg -lz
> #xlc HDF_LIBS = $(OV_RPATH)$(HDF)/lib -L$(HDF)/lib -lmfhdf -ldf -lz
>
> FORTRAN_LIBS =
> #gcc FORTRAN_LIBS =-lnsl -lg2c
> #gfortran FORTRAN_LIBS =-lgfortran
> # This next line will be used with the Portland group compiler (the
> configure script will set the next line)
> # 080623: aio_read etc. are found in /usr/lib/librt.so
> PGI_LIB =
> #pgf77 FORTRAN_LIBS = $(OV_RPATH)$(PGI_LIB) -L$(PGI_LIB) -lpgftnrtl -lpgmp
>  -lpgc -lrt -lstd
> # This next line will be used with the intel fortran compiler. (the
> configure script will set the next line)
> # g2c may be needed by lapack (for cg)
> IFORT_LIB =
> #ifc FORTRAN_LIBS = $(OV_RPATH)$(IFORT_LIB) -L$(IFORT_LIB) -lF90 -lIEPCF90
> -lg2c
> # old ifc FORTRAN_LIBS = -Wl,-rpath,/opt/intel/compiler60/ia32/lib
> -L/opt/intel/compiler60/ia32/lib -lF90 -lIEPCF90
> -L/usr/lib/gcc-lib/i386-redhat-linux/2.96 -lg2c
> # Here are the libraries for the new intel compiler (called ifort instead
> of ifc) (use "ifort -dryrun" to see libraries needed)
> #ifort FORTRAN_LIBS = $(OV_RPATH)$(IFORT_LIB) -L$(IFORT_LIB) -lifcoremt
> # Libraries using xlf and linux
> #xlf FORTRAN_LIBS = -L/opt/ibmcmp/xlf/bg/11.1/bglib -lxlopt -lxl -lxlf90
> -lxlfmath -L/opt/ibmcmp/xlsmp/bg/1.7/bglib/ -lxlomp_ser
> LIB_TARGETS= lib_date libso_date
> LIB_DEPENDENCIES= ../lib/lib_date
> TEMPLATES=
> RAPTEMPLATES=
>
> # The KCC compiler should be used to build the static library (for
> templates)
> AR = ar
> #KCC AR = KCC
> ARFLAGS = ruv
> #KCC ARFLAGS = -o
>
> LD = $(CC)
> LDFLAGS = -L
> RANLIB = ranlib
> SOFLAGS = -shared
> #xlc SOFLAGS = -qmkshrobj -qnostaticlink
> # the next line is changed by the configure script
> OpenGLibs=
> GLIBS=  $(OV_PERL_LIBRARIES) $(OV_RPATH)$(OPENGL_LIB) -L$(OPENGL_LIB)
> $(OpenGLibs) $(OV_MOTIF_LIBRARIES) $(OV_X_LIBRARIES) -lm
>
> # On Don's machine the pgi libraries need to follow the mpi libraries :
> # FLIBS= $(OV_RPATH)$(Overture)/lib $(LDFLAGS)$(Overture)/lib
> $(LibOverture) $(HDF_LIBS) $(FORTRAN_LIBS) $(AppLibraries)
> FLIBS= $(OV_RPATH)$(Overture)/lib $(LDFLAGS)$(Overture)/lib $(LibOverture)
> $(OV_COMPILER_LIBS) $(HDF_LIBS) $(AppLibraries) $(FORTRAN_LIBS)
>
>
> OGMGLIB = $(OV_RPATH)$(Overture)/lib $(LDFLAGS)$(Overture)/lib -lOgmg
>
>
> On 4/23/2012 7:07 PM, Bill Henshaw wrote:
>> Hi Joe:
>>   If you look at the compile line you will see no -I that points to
>> A++.h -- this should help you track down
>> the problem. ...Bill
>>
>> mpixlcxx_r -qarch=450d -qtune=450 -qmaxmem=16384
>> -I/home/jpbernst/Code/Overture/Test/Overture.v24/include -I.
>> -DBL_USE_DOUBLE -DBL_Solaris  -g -DH5_USE_16_API
>> -I/soft/apps/hdf5-1.8.0/include -c GenericDataBase.C HDF_DataBase.C
>> DataBaseBuffer.C
>>
>>
>>
>> On 04/23/2012 12:17 PM, J. P. Bernstein wrote:
>>> Thanks, Erik. That worked.
>>>
>>> All, I was finally able to build Mesa7.10.3 without errors. This
>>> allowed me to successfully configure Overture v24 on BG/P including
>>> disabling the PERL calls in Ogshow/OvertureParser.C. However, I am
>>> getting a build failure right away due to A++ no being found even
>>> though $APlusPlus is correct (see below).
>>>
>>> As a basic test, I tried the configure and make with stock Overture
>>> v24 (except for the addition of the bgp machine) without PERL
>>> excluded. I get the same error. Below is the pertinent terminal
>>> output (note that I do *not* get this A++ error when building
>>> Overture v24 with the noPERL and noGL-functionality patches from Erik
>>> applied). Is this a known problem? I have not been able to solve it
>>> upon quick testing.
>>>
>>> Best,
>>>
>>> Joe
>>>
>>> +++++Begin configure output+++++
>>> {login2}/home/jpbernst/Code/Overture/Test/Overture.v24>./configure
>>> bgp noX11
>>> Do NOT use X11.
>>>   *** configure for machine = bgp ****
>>>   *** machineType = [ppc64] ****
>>> First checking for proper definition of Overture environmental
>>> variables:
>>>         APlusPlus = /home/jpbernst/Code/Overture/Test/A++
>>>         OpenGL = /home/jpbernst/Code/Mesa-7.10.3
>>>         HDF = /soft/apps/hdf5-1.8.0
>>>         Overture = /home/jpbernst/Code/Overture/Test/Overture.v24
>>> Using Mesa `OpenGL' libraries since libMesaGL found in
>>> /home/jpbernst/Code/Mesa-7.10.3/lib
>>>   Mesa does not have GLwDrawA.h in the include dir
>>> INFO: I am going to copy my version of the GLw files into
>>> Overture/static directory
>>> perlloc = [/usr/lib/perl5/5.8.8/ppc-linux-thread-multi-64int/CORE]
>>> Using perl headers and lib from
>>> perllibs=[/usr/lib/perl5/5.8.8/ppc-linux-thread-multi-64int/CORE]
>>> Will link to the libraries perllibs=[-lperl -lnsl -ldl -lm -lcrypt
>>> -lutil -lpthread -lc]
>>> Detected use of hdf5
>>> Using configuration file config/MakeDefs.bgp
>>> Using Compilers: C++=mpixlcxx_r, C=mpixlc_r, Fortran=mprixlf77_r
>>> (base version: C++=mpixlcxx_r, C=mpixlc_r, Fortran=mprixlf77_r)
>>> **Overture will be compiled in double precision
>>>   debugging turned on, using debugFlag=-g.
>>> Checking for bool support
>>> bool is supported.
>>> Checking for exceptions support
>>> exceptions are supported.
>>> Checking for STL availability. $STLINC=
>>> stl is available using std include format
>>> the compiler understands namespaces
>>>
>>> the compiler understands default template arguments
>>>
>>> the compiler understands explicit
>>> Create the Makefile for directory: mapUtil
>>> Create the Makefile for directory: phoneyFiles
>>> Create the Makefile for directory: Cad
>>> Create the Makefile for directory: DataBase
>>> Create the Makefile for directory: Grid
>>> Create the Makefile for directory: GridFunction
>>> Create the Makefile for directory: GridGenerator
>>> Create the Makefile for directory: Mapping
>>> Create the Makefile for directory: Oges
>>> Create the Makefile for directory: Ogshow
>>> Create the Makefile for directory: otherStuff
>>> Create the Makefile for directory: bin
>>> Create the Makefile for directory: boxlib
>>> Create the Makefile for directory: lib
>>> Create the Makefile for directory: primer
>>> Create the Makefile for directory: sampleGrids
>>> Create the Makefile for directory: static
>>> Create the Makefile for directory: templates
>>> Create the Makefile for directory: examples
>>> Create the Makefile for directory: Ogmg
>>> Create the Makefile for directory: tests
>>>
>>> configuration options written to file configure.options
>>>
>>> Make options saved to file make.options.
>>>
>>> Build the Makefile in the main directory
>>> done configuration.
>>>
>>> ****************************************************************************************************
>>>
>>> WARNING: Environment variable LANG=en_US.UTF-8 -- Overture may not
>>> work with this language.
>>>           European languages may reverse the meaning of `.' and ','
>>> in numbers such a 3,14 or 3.14
>>>           and then Overture will not parse command files properly.
>>>           Type `locale' to see your language settings. You may need
>>> to change to the language `en_US'
>>> ****************************************************************************************************
>>>
>>> type `make' to build Overture (or 'make -j2' for a parallel make with
>>> 2 processes).
>>> type `make rapsodi' to build the Rapsodi libraries and rap.
>>>
>>> +++++End configure output+++++
>>>
>>> +++++Begin make output+++++
>>> {login2}/home/jpbernst/Code/Overture/Test/Overture.v24>make
>>> -----------------------------------------------------------------------
>>> type<make help>  for help. Run the configure script before running make
>>> -----------------------------------------------------------------------
>>> rm -rf A++; rm -f OpenGL; rm -f HDF; ln -s
>>> /home/jpbernst/Code/Overture/Test/A++ A++; ln -s
>>> /home/jpbernst/Code/Mesa-7.10.3 OpenGL; ln -s /soft/apps/hdf5-1.8.0 HDF
>>> make[1]: Entering directory
>>> `/gpfs/home/jpbernst/Code/Overture/Test/Overture.v24/DataBase'
>>> perl ../config/makeDepend -f depend -Y --
>>> -I/home/jpbernst/Code/Overture/Test/Overture.v24/include -I.
>>> -DBL_USE_DOUBLE -DBL_Solaris -- GenericDataBase.C HDF_DataBase.C
>>> DataBaseBuffer.C
>>> run makedepend ...
>>> ...done
>>> touch depend_date
>>> mpixlcxx_r -qarch=450d -qtune=450 -qmaxmem=16384
>>> -I/home/jpbernst/Code/Overture/Test/Overture.v24/include -I.
>>> -DBL_USE_DOUBLE -DBL_Solaris  -g -DH5_USE_16_API
>>> -I/soft/apps/hdf5-1.8.0/include -c GenericDataBase.C HDF_DataBase.C
>>> DataBaseBuffer.C
>>> GenericDataBase.C:
>>> "/home/jpbernst/Code/Overture/Test/Overture.v24/include/GenericDataBase.h",
>>> line 14.10: 1540-0836 (S) The #include file "A++.h" is not found.
>>> HDF_DataBase.C:
>>> "/home/jpbernst/Code/Overture/Test/Overture.v24/include/BoundaryConditionParameters.h",
>>> line 4.10: 1540-0836 (S) The #include file "A++.h"
>>
>>
>
>



Other related posts: