Some listers might not know about this obscure feature of the Optacon. Anyone who ever changed the camera for one of the special lenses probably knows that the camera can be put back two different ways. One of the ways causes the print to read up-side-down. What you may not have realized was that this is deliberate. If you have the camera in the up-side-down position and turn over a can so that the print is also up-side-down visually, sometimes it's easier to read because you can reach it better. This feature is not necessarily all that helpful but it's fun to experiment. NOTE: If anyone has never separated the camera before, don't do it without either reading the owner's manual or asking for instructions. There are a couple of tiny pins that you wouldn't want to accidentally break. Catherine ------------------------------------------------------------------------------ -Catherine Thomas braille@xxxxxxxxx / ------------------------------------------------------------------------------- To unsubscribe at any time, just send a message to: optacon-l-request@xxxxxxxxxxxxx with the word "unsubscribe" (without the quotes) in the message subject. Tell your friends about the list. They can subscribe by sending a message to: optacon-l-request@xxxxxxxxxxxxx with the word "subscribe" (without the quotes) in the message subject.