[modeleng] Re: copper tubes

Thanks , I will check them out , I just hope that the P&P to Flanders is 
not "prohibitive", as one needs to be of Greeck origin,with a tie to 
shipping to use Royal mail....
Regards
Patrick
I.D.PRIEST. wrote:

>Patrick,
>
>I have no connection with this company otherthan as a satisfied customer but 
>I use Mallard Metal Packs Ltd  53 Jasmin Croft Kingsheath Birmingham B14 
>5AX.   0121 624 0302  www.mallardmetals.co.uk
>
>This is a small company the bloke to ask for is Rob who I think is the 
>gaffer.  Their catalogue lists copper tube up 6 inch in diameter.  There is 
>no minimum order.
>
>As I say I've only ever received a good service from this company and have 
>never even been to their premises but credit given where its due.
>
>Hope this may be of some help to you.
>
>Regards, IDP
>"Life should NOT be a journey to the grave with the intention of arriving
>safely in an attractive and well preserved body, but rather to skid in
>sideways, Champagne in one hand - strawberries in the other,
>body thoroughly used up, totally worn out and screaming WOO HOO - What a
>Ride!"
>
>"Never drive faster than your gaurdian angel can fly"
>
>Priest & Sons Model Engineers
>http://www.kinvermes.pwp.blueyonder.co.uk/p1.htm
>
>----- Original Message ----- 
>From: "Patrick Coppens-Marian Lynch" <develop@xxxxxxxxx>
>To: <modeleng@xxxxxxxxxxxxx>
>Sent: Tuesday, August 29, 2006 8:40 AM
>Subject: [modeleng] Re: copper tubes
>
>
>
>I live in Flanders,Belgium
>I.D.PRIEST. wrote:
>
>  
>
>>Patrick,
>>
>>Where do you live?
>>
>>Regards IDP
>>
>>"Life should NOT be a journey to the grave with the intention of arriving
>>safely in an attractive and well preserved body, but rather to skid in
>>sideways, Champagne in one hand - strawberries in the other,
>>body thoroughly used up, totally worn out and screaming WOO HOO - What a
>>Ride!"
>>
>>"Never drive faster than your gaurdian angel can fly"
>>
>>Priest & Sons Model Engineers
>>http://www.kinvermes.pwp.blueyonder.co.uk/p1.htm
>>
>>----- Original Message ----- 
>>From: "Patrick Coppens-Marian Lynch" <develop@xxxxxxxxx>
>>To: <modeleng@xxxxxxxxxxxxx>
>>Sent: Monday, August 28, 2006 2:56 PM
>>Subject: [modeleng] copper tubes
>>
>>
>>evnin' all,
>>
>>If I wanted a Cu barrel tube, say 4 or 5 inch and about 15 inch long.
>>Where would I go, to get the either a piece of tube, or the plate to
>>make it.
>>In this godforsaken place, nobody seems to sell Cu-plate that is thicker
>>than 1mm,
>>or tubing that has an OD larger than 1 inch...
>>
>>Thanks,
>>Patrick
>>MODEL ENGINEERING DISCUSSION LIST.
>>
>>To UNSUBSCRIBE from this list, send a blank email to,
>>modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
>>line.
>>
>>
>>
>>
>>
>>    
>>
>MODEL ENGINEERING DISCUSSION LIST.
>
>To UNSUBSCRIBE from this list, send a blank email to,
>modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject 
>line.
>
>
>
>  
>


MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Other related posts: