[modeleng] Re: Soluable oil

From: "Phill Smith" <steam@xxxxxxxxxxxxxxxxxxxxxx>
To: <modeleng@xxxxxxxxxxxxx>
Date: Mon, 24 Nov 2008 11:42:48 +0900

G'Day Gents,

I have just filled my mills coolant tank up with a light neat cutting oil, 
but I would really like to change it back to soluable oil. The reason I have 
not put soluable oil in, is because in winter it's not unusual for the 
workshop to go down to -5°C overnight. I know that close to 0 temp's 
can/will cause the solution to separate.

What experience have other members had in very cold workshops?


Cheers,

Phill. 

MODEL ENGINEERING DISCUSSION LIST.

To UNSUBSCRIBE from this list, send a blank email to, 
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.

Follow-Ups:

[modeleng] Re: Soluable oil
From: Ron Head

References:
- [modeleng] Re: Import duty
  - From: Allen Messer
- [modeleng] Re: Import duty
  - From: Barrie Purslow
- [modeleng] O rings
  - From: Alan Stepney
- [modeleng] Re: O rings
  - From: Craig Gluyas
- [modeleng] Re: O rings
  - From: Clif Walker
- [modeleng] Re: O rings
  - From: Clif Walker
- [modeleng] Re: O rings
  - From: TEL
- [modeleng] Re: O rings
  - From: Jesse Livingston
- [modeleng] Re: O rings
  - From: Clif Walker

[modeleng] Re: Soluable oil

Other related posts: