[modeleng] Re: LBSC D3 class
- From: John Baguley <baggo@xxxxxxxxxx>
- To: modeleng@xxxxxxxxxxxxx
- Date: Sat, 08 Nov 2008 20:11:09 +0000
LBSC produced a design for a simple single cylinder, spirit fired D3 in
2½" gauge (Victoria) but it is only very loosely based on the original.
There's a write up on one here:
http://www.sidestreetbannerworks.com/locos/loco61.html
The original drawings have been lost over the years but I have drawn up
a new set for the 2½" Gauge Association. I don't know of any other
versions though.
John
Alan Stepney wrote:
> Someone contacted me regarding an 0-4-4T that they have recently purchased.
> He assumed that it was an O2, but given that it is named Emsworth, with the
> number 388, I did some digging and found that that name and number applied
> to a LBSC D3 class, built in 1894.
>
> Does anyone know of any model design for that loco, or a source of drawings
> for it in any scale, or any other information about them?
>
> I know just the basics, but have few books on the Southern Rlwy or its
> constituents.
>
> Alan
>
> MODEL ENGINEERING DISCUSSION LIST.
>
> To UNSUBSCRIBE from this list, send a blank email to,
> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject
> line.
>
>
>
>
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
