[modeleng] Re: Diamond Core Drills
- From: "Jesse Livingston" <fernj1@xxxxxxxxxxx>
- To: <modeleng@xxxxxxxxxxxxx>
- Date: Tue, 8 Apr 2008 21:40:04 -0500
Clif,
Maybe once you had got down to the washer, there was no load on the bolt
which is why it turned so freely since the bolt was not bottomed out in the
hole.
Jesse in warm dry (for a change) Tennessee
MODEL ENGINEERING DISCUSSION LIST.
To UNSUBSCRIBE from this list, send a blank email to,
modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.
Other related posts:
