Thanks Robert. ----- Original Message ----- From: Robert Lütteke To: MoAccess@xxxxxxxxxxxxx Sent: Monday, September 24, 2007 3:28 PM Subject: Re: [MoAccess] Problem connecting to the editors with usb press store if you changed your settings. ----- Original Message ----- From: Jes To: MoAccess@xxxxxxxxxxxxx Sent: Monday, September 24, 2007 9:13 PM Subject: Re: [MoAccess] Problem connecting to the editors with usb That's all well and good, thanks for the info Bryan, but how do you make those changes permenant so you don't have to reset the midi to usb every time you turn the motif on? Thanks ----- Original Message ----- From: Bryan Smart To: MoAccess@xxxxxxxxxxxxx Sent: Sunday, September 23, 2007 11:27 PM Subject: Re: [MoAccess] Problem connecting to the editors with usb You want to use Yamaha port 1 for both in and out. Try using Autoconnect on the setup menu, and the editors will scan all ports for the Motif. Bryan -------------------------------------------------------------------------- From: moaccess-bounce@xxxxxxxxxxxxx [mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Jes Sent: Sunday, September 23, 2007 4:59 PM To: MoAccess@xxxxxxxxxxxxx Subject: [MoAccess] Problem connecting to the editors with usb Hi all. I noticed that the manuals for John's editors say to go into the setup menu and select the appropriate ports. I see that Yamaha motif xs 1 through 4 are showing and are available, but every time I try to connect with them it eventually gives me a not connected message on the screen. Bryan or someone, give me a hand please. Sorry if this message has been posted before. Thanks Jes