Re: [MoAccess] Problem connecting to the editors with usb
- From: Robert Lütteke <robert.luetteke@xxxxxx>
- To: <MoAccess@xxxxxxxxxxxxx>
- Date: Mon, 24 Sep 2007 21:28:06 +0200
press store if you changed your settings.
----- Original Message -----
From: Jes
To: MoAccess@xxxxxxxxxxxxx
Sent: Monday, September 24, 2007 9:13 PM
Subject: Re: [MoAccess] Problem connecting to the editors with usb
That's all well and good, thanks for the info Bryan, but how do you make
those changes permenant so you don't have to reset the midi to usb every time
you turn the motif on? Thanks
----- Original Message -----
From: Bryan Smart
To: MoAccess@xxxxxxxxxxxxx
Sent: Sunday, September 23, 2007 11:27 PM
Subject: Re: [MoAccess] Problem connecting to the editors with usb
You want to use Yamaha port 1 for both in and out.
Try using Autoconnect on the setup menu, and the editors will scan all
ports for the Motif.
Bryan
----------------------------------------------------------------------------
From: moaccess-bounce@xxxxxxxxxxxxx [mailto:moaccess-bounce@xxxxxxxxxxxxx]
On Behalf Of Jes
Sent: Sunday, September 23, 2007 4:59 PM
To: MoAccess@xxxxxxxxxxxxx
Subject: [MoAccess] Problem connecting to the editors with usb
Hi all. I noticed that the manuals for John's editors say to go into the
setup menu and select the appropriate ports. I see that Yamaha motif xs 1
through 4 are showing and are available, but every time I try to connect with
them it eventually gives me a not connected message on the screen. Bryan or
someone, give me a hand please. Sorry if this message has been posted before.
Thanks
Jes
Other related posts:
