I tried that and it couldn't find them. ----- Original Message ----- From: Bryan Smart <bryansmart@xxxxxxxxxxxxxx> To: <MoAccess@xxxxxxxxxxxxx> Sent: Sunday, September 23, 2007 11:27 PM Subject: Re: [MoAccess] Problem connecting to the editors with usb You want to use Yamaha port 1 for both in and out. Try using Autoconnect on the setup menu, and the editors will scan all ports for the Motif. Bryan ________________________________ From: moaccess-bounce@xxxxxxxxxxxxx [mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Jes Sent: Sunday, September 23, 2007 4:59 PM To: MoAccess@xxxxxxxxxxxxx Subject: [MoAccess] Problem connecting to the editors with usb Hi all. I noticed that the manuals for John's editors say to go into the setup menu and select the appropriate ports. I see that Yamaha motif xs 1 through 4 are showing and are available, but every time I try to connect with them it eventually gives me a not connected message on the screen. Bryan or someone, give me a hand please. Sorry if this message has been posted before. Thanks Jes