I'm using the mix editor and running no other programs. When I go to chanel 1 and change something, say "transpose", I hear the chanel that was transposed and all others. ----- Original Message ----- From: Bryan Smart <bryansmart@xxxxxxxxxxxxxx> To: <MoAccess@xxxxxxxxxxxxx> Sent: Monday, September 24, 2007 11:16 AM Subject: Re: [MoAccess] Mix editor for the motif es 7 You need to give better descriptions. I can't imagine what you're doing. What editor are you using. There are like 6 or 7 of them. Do you have Sonar open at the same time, or are you running any other programs at the same time as the editors that uses MIDI? Bryan -----Original Message----- From: moaccess-bounce@xxxxxxxxxxxxx [mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of fioresq1@xxxxxxxxxxx Sent: Monday, September 24, 2007 5:19 AM To: MoAccess@xxxxxxxxxxxxx Subject: Re: [MoAccess] Mix editor for the motif es 7 Bryan: when I keep local control on, seems like I'm hearing all chanels at once, any way to fix this? John ----- Original Message ----- From: Bryan Smart <bryansmart@xxxxxxxxxxxxxx> To: <MoAccess@xxxxxxxxxxxxx> Sent: Sunday, September 23, 2007 11:31 PM Subject: Re: [MoAccess] Mix editor for the motif es 7 John, the local off setting means that, when you play the keyboard of the Motif, the messages from the keyboard won't go to the tone generator (the part of the Motif that actually produces instrument sounds). You shouldn't usually turn this setting off, unless you're running a program like Sonar. When sonar is running, it will control the Motif's tone generator directly. Bryan -----Original Message----- From: moaccess-bounce@xxxxxxxxxxxxx [mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of fioresq1@xxxxxxxxxxx Sent: Sunday, September 23, 2007 10:31 AM To: MoAccess@xxxxxxxxxxxxx Subject: [MoAccess] Mix editor for the motif es 7 Hello: I have installed the usb driver for the motif es and installed the demo version of the mix editor from John Melas. When I turn local dcontrol off, I'm getting no sound through the motif. in the midi set up of the editor menu, I chose usb1 for in and out. Any help would be appreciated. Thanks. John Fioravanti