[kismac] Re: a bug i may have found
- From: Chapin's Bulk <chapinsbulk@xxxxxxxxxxx>
- To: kismac@xxxxxxxxxxxxx
- Date: Wed, 9 Jul 2003 23:37:16 -0500
MAC... my bad
On Wednesday, July 9, 2003, at 11:39 PM, N. Karras wrote:
> Spoofing of IP or spoofing of MAC?
>
> ----- Original Message -----=20
> From: "Chapin's Bulk" <chapinsbulk@xxxxxxxxxxx>
> To: <kismac@xxxxxxxxxxxxx>
> Cc: "Chapin's Bulk" <chapinsbulk@xxxxxxxxxxx>
> Sent: Wednesday, July 09, 2003 6:49 PM
> Subject: [kismac] Re: a bug i may have found
>
>
>> =20
>> =20
>> I believe the bug is in the spoofing of the IP on the prismII... If
>> i=20
>> run kismac, the error does not occur, so i cen change the IP back
>> to=20
>> factory, and then quit kismac, no errors... change the IP,
>> error.....=20
>> so the bug appears to be in the WirelessMAC program that kismac=20
>> installed.... When running kismac and kismac drivers, no problem,
>> when =
>
>> i quit kismac and the sourceforge drivers it has a problem....
>> =20
>> =20
>> =20
>> On Wednesday, July 9, 2003, at 03:13 PM, N. Karras wrote:
>> =20
>>> In that case, I would not be so quick to suspect Kismac is causing =
> the=20
>>> =3D
>>> problem, unless it only happens after Kismac is started, then =
> closed,=20
>>> in =3D
>>> which case it may have left a driver installed which conflicts with =
> =3D
>>> something else. Otherwise, Kismac doesn't install anything resident
>>> =
>
>>> as =3D
>>> far as I know other than when you start it, then it unloads when =
> it's =3D
>>> closed. If you restart the computer, do not start Kismac, and =
> insert =3D
>>> your card, and it crashes, you have basically eliminated is as the =
> =3D
>>> problem.
>>>
>>> ----- Original Message -----=3D20
>>> From: "Chapin's Bulk" <chapinsbulk@xxxxxxxxxxx>
>>> To: <kismac@xxxxxxxxxxxxx>
>>> Cc: "Chapin's Bulk" <chapinsbulk@xxxxxxxxxxx>
>>> Sent: Wednesday, July 09, 2003 9:41 AM
>>> Subject: [kismac] Re: a bug i may have found
>>>
>>>
>>>> It does.
>>>> =3D20
>>>> =3D20
>>>> =3D20
>>>> =3D20
>>>> =3D20
>>>> On Wednesday, July 9, 2003, at 02:39 AM, N. Karras wrote:
>>>> =3D20
>>>>> First find out if it still does it with Kismac not running.
>>>>>
>>>>> ----- Original Message -----=3D3D20
>>>>> From: "Chapin's Bulk" <chapinsbulk@xxxxxxxxxxx>
>>>>> To: <kismac@xxxxxxxxxxxxx>
>>>>> Cc: "Jeff Chapin" <chapinj@xxxxxxx>
>>>>> Sent: Tuesday, July 08, 2003 8:41 AM
>>>>> Subject: [kismac] a bug i may have found
>>>>>
>>>>>
>>>>>> Ok, i have a linksys WPC11v3 card, which i installed the =3D3D
>>>>> wirelessdriver=3D3D20
>>>>>> driver for, then i installed kismac with patch. I then changed=20
>>>>>> the=3D20
>>>>>> MAC =3D3D
>>>>>
>>>>>> on the card... This caused an instant OS problem requiring a =
> =3D3D
>>>>> reboot....=3D3D20
>>>>>> Any time I inserted the card, with new MAC, I would instantly be =
> =3D
>>> =3D3D
>>>>> forced=3D3D20
>>>>>> to do a hard reboot... I solved this by running kismac, and =3D
>>> hten=3D3D20
>>>>>> inserting the card, and changing the mac to the factory setting. =
> =3D
>>> =3D3D
>>>>> Worked=3D3D20
>>>>>> just fine. I was able to recreate the problem using variations =
> =3D
>>> of=3D3D20
>>>>>> this.. any time OSX tried to load the card, the comp required =
> a=3D20
>>>>>> hard=3D3D20
>>>>>> reboot... At no time durring this was i able to "re-inject"=3D20
>>>>>> packets... =3D3D
>>>>>
>>>>>> I got a " i am not happy" message that appeared that only one=20
>>>>>> card=3D20
>>>>>> was =3D3D
>>>>>
>>>>>> seen by kismac......
>>>>>> =3D3D20
>>>>>> =3D3D20
>>>>>> I am running kismac 0.05b, ( same results under what ever is =
> listed=20
>>>>>> =3D
>>>
>>>>>> as =3D3D
>>>>>
>>>>>> stable on maintaners site... i move to "untested" to see if =
> this=3D20
>>>>>> has=3D3D20
>>>>>> been addressed)
>>>>>> =3D3D20
>>>>>> airport card (not extreme)
>>>>>> =3D3D20
>>>>>> OS 10.2.6
>>>>>> =3D3D20
>>>>>> linksys WPC11v3 card ( supposedly a prism2 card, and seems =
> to=3D20
>>>>>> behave=3D3D20
>>>>>> like one in most respects)
>>>>>> =3D3D20
>>>>>> =3D3D20
>>>>>> =3D3D20
>>>>>> =3D3D20
>>>>>> towards the end of this, i managed to cause a reboot to be needed
>>>>>> =
> =3D
>>> =3D3D
>>>>> while=3D3D20
>>>>>> "wirelessMAC" was running... now i cannot run the program to =
> change=20
>>>>>> =3D
>>> =3D3D
>>>>> the=3D3D20
>>>>>> mac to factory...... I get a " program terminated" error... =
> even=3D20
>>>>>> after =3D3D
>>>>>
>>>>>> i removed, reinstalled the program.....
>>>>>> =3D3D20
>>>>>> =3D3D20
>>>>>> Thanks for the GREAT work on this project... Let me know if i =
> can=3D20
>>>>>> help =3D3D
>>>>>
>>>>>> in any way....
>>>>>> =3D3D20
>>>>>> =3D3D20
>>>>>> jeff chapin
>>>>>> =3D3D20
>>>>>>
>>>>>
>>>> =3D20
>>>>
>>>
>> =20
>>
>
Other related posts:
