[kismac] Test II: Please ignore + Erase.
- From: "N. Karras" <nkarras@xxxxxxxxxxx>
- To: <kismac@xxxxxxxxxxxxx>
- Date: Thu, 10 Jul 2003 02:17:08 -0400
This is a test to determing where the extra characters are coming from.
Please ignore and erase it.
----- Original Message -----
From: "Chapin's Bulk" <chapinsbulk@xxxxxxxxxxx>
To: <kismac@xxxxxxxxxxxxx>
Cc: "Chapin's Bulk" <chapinsbulk@xxxxxxxxxxx>
Sent: Thursday, July 10, 2003 12:37 AM
Subject: [kismac] Re: a bug i may have found
: MAC... my bad
: On Wednesday, July 9, 2003, at 11:39 PM, N. Karras wrote:
:
: > Spoofing of IP or spoofing of MAC?
: >
: > ----- Original Message -----=20
: > From: "Chapin's Bulk" <chapinsbulk@xxxxxxxxxxx>
: > To: <kismac@xxxxxxxxxxxxx>
: > Cc: "Chapin's Bulk" <chapinsbulk@xxxxxxxxxxx>
: > Sent: Wednesday, July 09, 2003 6:49 PM
: > Subject: [kismac] Re: a bug i may have found
: >
: >
: >> =20
: >> =20
: >> I believe the bug is in the spoofing of the IP on the prismII... If
: >> i=20
: >> run kismac, the error does not occur, so i cen change the IP back
: >> to=20
: >> factory, and then quit kismac, no errors... change the IP,
: >> error.....=20
: >> so the bug appears to be in the WirelessMAC program that kismac=20
: >> installed.... When running kismac and kismac drivers, no problem,
: >> when =
: >
: >> i quit kismac and the sourceforge drivers it has a problem....
: >> =20
: >> =20
: >> =20
: >> On Wednesday, July 9, 2003, at 03:13 PM, N. Karras wrote:
: >> =20
: >>> In that case, I would not be so quick to suspect Kismac is causing =
: > the=20
: >>> =3D
: >>> problem, unless it only happens after Kismac is started, then =
: > closed,=20
: >>> in =3D
: >>> which case it may have left a driver installed which conflicts with =
: > =3D
: >>> something else. Otherwise, Kismac doesn't install anything resident
: >>> =
: >
: >>> as =3D
: >>> far as I know other than when you start it, then it unloads when =
: > it's =3D
: >>> closed. If you restart the computer, do not start Kismac, and =
: > insert =3D
: >>> your card, and it crashes, you have basically eliminated is as the =
: > =3D
: >>> problem.
: >>>
: >>> ----- Original Message -----=3D20
: >>> From: "Chapin's Bulk" <chapinsbulk@xxxxxxxxxxx>
: >>> To: <kismac@xxxxxxxxxxxxx>
: >>> Cc: "Chapin's Bulk" <chapinsbulk@xxxxxxxxxxx>
: >>> Sent: Wednesday, July 09, 2003 9:41 AM
: >>> Subject: [kismac] Re: a bug i may have found
: >>>
: >>>
: >>>> It does.
: >>>> =3D20
: >>>> =3D20
: >>>> =3D20
: >>>> =3D20
: >>>> =3D20
: >>>> On Wednesday, July 9, 2003, at 02:39 AM, N. Karras wrote:
: >>>> =3D20
: >>>>> First find out if it still does it with Kismac not running.
: >>>>>
: >>>>> ----- Original Message -----=3D3D20
: >>>>> From: "Chapin's Bulk" <chapinsbulk@xxxxxxxxxxx>
: >>>>> To: <kismac@xxxxxxxxxxxxx>
: >>>>> Cc: "Jeff Chapin" <chapinj@xxxxxxx>
: >>>>> Sent: Tuesday, July 08, 2003 8:41 AM
: >>>>> Subject: [kismac] a bug i may have found
: >>>>>
: >>>>>
: >>>>>> Ok, i have a linksys WPC11v3 card, which i installed the =3D3D
: >>>>> wirelessdriver=3D3D20
: >>>>>> driver for, then i installed kismac with patch. I then changed=20
: >>>>>> the=3D20
: >>>>>> MAC =3D3D
: >>>>>
: >>>>>> on the card... This caused an instant OS problem requiring a =
: > =3D3D
: >>>>> reboot....=3D3D20
: >>>>>> Any time I inserted the card, with new MAC, I would instantly be =
: > =3D
: >>> =3D3D
: >>>>> forced=3D3D20
: >>>>>> to do a hard reboot... I solved this by running kismac, and =3D
: >>> hten=3D3D20
: >>>>>> inserting the card, and changing the mac to the factory setting. =
: > =3D
: >>> =3D3D
: >>>>> Worked=3D3D20
: >>>>>> just fine. I was able to recreate the problem using variations =
: > =3D
: >>> of=3D3D20
: >>>>>> this.. any time OSX tried to load the card, the comp required =
: > a=3D20
: >>>>>> hard=3D3D20
: >>>>>> reboot... At no time durring this was i able to "re-inject"=3D20
: >>>>>> packets... =3D3D
: >>>>>
: >>>>>> I got a " i am not happy" message that appeared that only one=20
: >>>>>> card=3D20
: >>>>>> was =3D3D
: >>>>>
: >>>>>> seen by kismac......
: >>>>>> =3D3D20
: >>>>>> =3D3D20
: >>>>>> I am running kismac 0.05b, ( same results under what ever is =
: > listed=20
: >>>>>> =3D
: >>>
: >>>>>> as =3D3D
: >>>>>
: >>>>>> stable on maintaners site... i move to "untested" to see if =
: > this=3D20
: >>>>>> has=3D3D20
: >>>>>> been addressed)
: >>>>>> =3D3D20
: >>>>>> airport card (not extreme)
: >>>>>> =3D3D20
: >>>>>> OS 10.2.6
: >>>>>> =3D3D20
: >>>>>> linksys WPC11v3 card ( supposedly a prism2 card, and seems =
: > to=3D20
: >>>>>> behave=3D3D20
: >>>>>> like one in most respects)
: >>>>>> =3D3D20
: >>>>>> =3D3D20
: >>>>>> =3D3D20
: >>>>>> =3D3D20
: >>>>>> towards the end of this, i managed to cause a reboot to be needed
: >>>>>> =
: > =3D
: >>> =3D3D
: >>>>> while=3D3D20
: >>>>>> "wirelessMAC" was running... now i cannot run the program to =
: > change=20
: >>>>>> =3D
: >>> =3D3D
: >>>>> the=3D3D20
: >>>>>> mac to factory...... I get a " program terminated" error... =
: > even=3D20
: >>>>>> after =3D3D
: >>>>>
: >>>>>> i removed, reinstalled the program.....
: >>>>>> =3D3D20
: >>>>>> =3D3D20
: >>>>>> Thanks for the GREAT work on this project... Let me know if i =
: > can=3D20
: >>>>>> help =3D3D
: >>>>>
: >>>>>> in any way....
: >>>>>> =3D3D20
: >>>>>> =3D3D20
: >>>>>> jeff chapin
: >>>>>> =3D3D20
: >>>>>>
: >>>>>
: >>>> =3D20
: >>>>
: >>>
: >> =20
: >>
: >
:
:
Other related posts:
- » [kismac] Test II: Please ignore + Erase.
