hey, > Ok, i have a linksys WPC11v3 card, which i installed the wirelessdriver > driver for, then i installed kismac with patch. I then changed the MAC > on the card... This caused an instant OS problem requiring a reboot.... > Any time I inserted the card, with new MAC, I would instantly be forced > to do a hard reboot... I solved this by running kismac, and hten > inserting the card, and changing the mac to the factory setting. Worked > just fine. I was able to recreate the problem using variations of > this.. any time OSX tried to load the card, the comp required a hard > reboot... At no time durring this was i able to "re-inject" packets... > I got a " i am not happy" message that appeared that only one card was > seen by kismac...... unfortunately i dont own a prism 2.5 card, so that i can test you configuration. is there anybody who can confirm this problem? for packet injection set your driver to viha. > I am running kismac 0.05b, ( same results under what ever is listed as > stable on maintaners site... i move to "untested" to see if this has > been addressed) > > airport card (not extreme) > > OS 10.2.6 > > linksys WPC11v3 card ( supposedly a prism2 card, and seems to behave > like one in most respects) > > towards the end of this, i managed to cause a reboot to be needed while > "wirelessMAC" was running... now i cannot run the program to change the > mac to factory...... I get a " program terminated" error... even after > i removed, reinstalled the program..... can you send me a log of this crash? mick