Re: Reply to sender

  • From: "Steve Gomes" <finnygomes@xxxxxxx>
  • To: <jfw@xxxxxxxxxxxxx>
  • Date: Tue, 23 Jan 2007 16:07:00 -0700

ah, jeeze. I am gonna call in one of my boys. Jerry Cox? will you get in there and fix Roger up? Respond red light and siren. 



my web site
www.11954.com/gomes
phone 720-747-4990
----- Original Message ----- From: "Roger Bachelder" <bachelder3@xxxxxxxxxxx> 
To: <jfw@xxxxxxxxxxxxx>
Sent: Tuesday, January 23, 2007 2:44 PM
Subject: RE: Reply to sender



Hello Steve,
I understand how to set up the keystroke. That is not really the issue now. 
Your right, I wasn't confused about that at all. What happened is, I
originally set up the keystroke to Control, shift, R. now when I sent it to 
Judith, It did say, Reply directly to sender. Unfortunately, the email was
sent to the list too. So I went back into keyboard manager, and set a second 
keystroke to Control, shift, A. then I deleted the first one. The second
email I sent to Allan. This email did the same thing. It went to the sender 
and also the list. So now that I confirmed that it was not a keystroke
issue, I went back into the keyboard manager, and reset the keystroke back
to the original one. Control, shift, R. Here is where it gets tricky. When I 
press Control, shift, R now, jaws does not say anything. It's completely
silent.
Before I set the keystroke for, send directly to sender, The Control, shift, R, brought up the reply to all. Or, what it did was, replied to the original sender and the list. When alls I wanted it to go to was the original sender. 
So needless to say, I have two problems now. One, the reply directly to
sender is still not working right. and second, I no longer have jaws saying 
anything when I press the Control, Shift, r keystroke.

I have not been able to fix this one all day.
You want to talk about aggravating.

Do you have any thoughts on this one?
Or for that matter, does anyone?

Thanks for helping.

Roger Bachelder
-----Original Message-----
From: jfw-bounce@xxxxxxxxxxxxx [mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf
of Steve Gomes
Sent: Tuesday, January 23, 2007 3:41 PM
To: jfw@xxxxxxxxxxxxx
Subject: Re: Reply to sender

okay I just played with it. now when you are on that place where it says
"none." hit the context key. it is one left of the right control key. It
will say add key stroke ... control a. I think you can hit control a if you want. then pick a key combo. how about control shift r. then tab and it will
say add button hit space bar on that and tab to okay and hit enter. Lets see 

if that works


my web site
www.11954.com/gomes
phone 720-747-4990
----- Original Message ----- From: "Roger Bachelder" <bachelder3@xxxxxxxxxxx> 
To: <jfw@xxxxxxxxxxxxx>
Sent: Tuesday, January 23, 2007 10:24 AM
Subject: RE: Reply to sender



Hello Steve,

You certainly pointed me in the right direction. On the reply to sender,
it
says none.
Just want to note, I'm using Outlook. In case it matters for a key
setting.
Does anyone know how to create this key combination?

Thanks for the help Steve.
Roger Bachelder



Hey Roger lets give this a try. Hit insert f2 and down arrow to key board
manager. You will hear it say outlook express 1 of 92 or something like
that. tab once and you will be in a list of the keys and what they do. hit the letter r and you will hear some read commands. then down arrow and see 
if you find reply directly to sender. It should say what key combination
makes it work. If it says "none" then we have to create one and I am not
sure how to do it. I just did it once and was able to do it by tabbing
around. But someone else can tell us how to do it. Lets just see if you
have

A key stroke listed there.

Hello everyone,


First of all, Thanks Judith, Adrian and Yardbird for getting back to me.
I'm going to write below what is happening with all of the suggestions.
Hopefully I'm missing something simple.
When I replied to Judith, I used the Control Shift, R keystroke.
Unfortunately, the message was sent to the list.
When I do the Insert, shift, R keystroke. I get a ding. I'm guessing this 
is
because, I'm using Jaws 7.0.
When I have a message open, and I do a Control R, and start tabbing down
to
see the original senders address, the size of the message starts to
change.
Either way I try, I can't get jaws to say, replying directly to Sender.
Does anyone have any suggestions?
Thanks again for all of the help.
It's much appreciated.

Roger Bachelder

--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw

If you have any concerns about the list, post received from the list, or
the way the list is being run, do not post them to the list. Rather
contact the list owner at jfw-admins@xxxxxxxxxxxxxx



--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw

If you have any concerns about the list, post received from the list, or
the
way the list is being run, do not post them to the list. Rather contact
the
list owner at jfw-admins@xxxxxxxxxxxxxx

--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw

If you have any concerns about the list, post received from the list, or
the way the list is being run, do not post them to the list. Rather
contact the list owner at jfw-admins@xxxxxxxxxxxxxx



--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the 
list owner at jfw-admins@xxxxxxxxxxxxxx

--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list: http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com 
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. 
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx 



--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list: 
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to 
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw

If you have any concerns about the list, post received from the list, or the 
way the list is being run, do not post them to the list. Rather contact the 
list owner at jfw-admins@xxxxxxxxxxxxxx

Other related posts:

  1. Home
  2. jfw
  3. Archive
  4. 01-2007