Re: JAWS 10 Beta & 2 Sound Cards
- From: "Don Moore" <donmoore@xxxxxxxxxxx>
- To: <jfw@xxxxxxxxxxxxx>
- Date: Mon, 25 Aug 2008 23:48:26 -0300
Hi Mitch,
In order to have JAWS running off the on-board sound card (in my case,
the RealTech sound card) instead of the external card, (in my case, the
SoundBlaster Odygy), you must insert the following line into the jfw.ini
file of the JAWS version you are using:
Synth1Port=Realtek HD Audio rear output
This line must be inserted in the new jfw.ini file each time you upgrade to
a new version of JAWS; otherwise, JAWS will run off the external card just
like everything else on your PC. The line should be inserted just above the
first line that starts with Synth2. The path for the jfw.ini file for JAWS
10.0 is:
C:\Program Files\Freedom Scientific\Jaws\10.0\jfw.ini
Hope this helps,
Don
----- Original Message -----
From: "Dave Mitchell" <mitch@xxxxxxxxxxxxxx>
To: "jfw list" <jfw@xxxxxxxxxxxxx>
Sent: Monday, August 25, 2008 9:06 PM
Subject: JAWS 10 Beta & 2 Sound Cards
Hi, The beta seems to have disrupted the sound separation of my 2 sound
cards as now all the sounds come through one set of speakers.
I have tried without success to correct this in the Sounds and Speech
manager. I also seem to recall faintly about having to do some kind of
manipulation of files for the 2 sound cards to work independently.
I would appreciate a reeducation on this if others with 2 sound cards are
having similar results with the beta 10. Thanks, Mitch
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or
the way the list is being run, do not post them to the list. Rather
contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from the list, or the
way the list is being run, do not post them to the list. Rather contact the
list owner at jfw-admins@xxxxxxxxxxxxxx
Other related posts:
