-----Original Message-----
From: jfw-bounce@xxxxxxxxxxxxx
[mailto:jfw-bounce@xxxxxxxxxxxxx] On Behalf Of Don Moore
Sent: Thursday, September 11, 2008 1:16 PM
To: jfw@xxxxxxxxxxxxx
Subject: Re: JAWS 10 Beta & 2 Sound Cards
Hi Mitch,
Sorry I'm so late replying, but I had surgery last week
and was in
hospital for 5 days. I am just now getting caught up with my E-mail.
The process of forcing JAWS to choose a particular
soundcard in XP goes
as
follows:
1. Open the Control Pannel.
2. Cursor to, and open the "sounds and audio devices."
3. Control-Tab to the audio tab.
4. In the first selection in that tab, which is the playback
device, select
as default the card on which you wish to load JAWS.
5. Virtualize the current window by pressing insert-control-w.
6. Cursor down to the device which was chosen in step four.
7. press shift-DownArrow to select that line.
8. Press Control-c to copy the line to the clipboard.
9. press escape to close the virtualized window.
10. press Alt-F4 until you get to the desktop.
11. Locate and open the JFW.INI file located in c:\program
files\Freedom
Scientific\Jaws\10.0.
12. In the JFW.INI file, insert a blank line after the
statement which
reads: Synth1Driver =.........
13. Cursor up to the blank line which you created.
14. type the following: Synth1Port=
15. Directly to the right of the equal sign, press Control-V
to insert the
contents of the clipboard which you created in step 8.
16. Press Control-S to save the file.
17. On-load and re-load JAWS.
That should do it.
Hope this helps,
Don
----- Original Message -----
From: "Dave Mitchell" <mitch@xxxxxxxxxxxxxx>
To: <jfw@xxxxxxxxxxxxx>
Sent: Saturday, August 30, 2008 5:58 PM
Subject: Re: JAWS 10 Beta & 2 Sound Cards
> Hi Don, Sorry to intrude again but I have another question
about your fix
> and the INI file.
> Listed below are my 2 sound cards as described in the
Sounds and Speech
> manager exactly as they appear including spaces and upper case where
> appropriate, etc:
>
> Vinyl AC'97 Audio (Wave)
>
> SB Audigy 2 Audio [D400]
>
> How would these appear in a correct format if they were to
replace the
> sound
> card example in your sample line?
> No rush as I am dealing with speech through one set for now.
> Incidentally,
> if I play with the Audio settings in the Sounds and Speech
manager, I can
> reverse which set of speakers carries the sounds but it is
still doubled
> and
> I cannot force the previous separation, if that makes
sense. Thanks very
> much, Mitch
> ----- Original Message -----
> From: "Don Moore" <donmoore@xxxxxxxxxxx>
> To: <jfw@xxxxxxxxxxxxx>
> Sent: Monday, August 25, 2008 7:48 PM
> Subject: Re: JAWS 10 Beta & 2 Sound Cards
>
>
> Hi Mitch,
>
> In order to have JAWS running off the on-board sound
card (in my case,
> the RealTech sound card) instead of the external card, (in
my case, the
> SoundBlaster Odygy), you must insert the following line
into the jfw.ini
> file of the JAWS version you are using:
>
>
>
> Synth1Port=Realtek HD Audio rear output
>
>
>
> This line must be inserted in the new jfw.ini file each
time you upgrade
> to
> a new version of JAWS; otherwise, JAWS will run off the
external card just
> like everything else on your PC. The line should be
inserted just above
> the
> first line that starts with Synth2. The path for the
jfw.ini file for JAWS
> 10.0 is:
>
>
>
> C:\Program Files\Freedom Scientific\Jaws\10.0\jfw.ini
>
>
>
> Hope this helps,
>
>
>
> Don
>
> ----- Original Message -----
> From: "Dave Mitchell" <mitch@xxxxxxxxxxxxxx>
> To: "jfw list" <jfw@xxxxxxxxxxxxx>
> Sent: Monday, August 25, 2008 9:06 PM
> Subject: JAWS 10 Beta & 2 Sound Cards
>
>
>> Hi, The beta seems to have disrupted the sound separation
of my 2 sound
>> cards as now all the sounds come through one set of speakers.
>> I have tried without success to correct this in the Sounds
and Speech
>> manager. I also seem to recall faintly about having to do
some kind of
>> manipulation of files for the 2 sound cards to work independently.
>> I would appreciate a reeducation on this if others with 2
sound cards are
>> having similar results with the beta 10. Thanks, Mitch
>>
>> --
>> JFW related links:
>> JFW homepage: http://www.freedomscientific.com/
>> Scripting mailing list:
>> http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
>> JFW List instructions:
>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>> To unsubscribe from this mailing list, send a message to
>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the
subject line.
>> Archives located at: //www.freelists.org/archives/jfw
>>
>> If you have any concerns about the list, post received
from the list, or
>> the way the list is being run, do not post them to the list. Rather
>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>
> --
> JFW related links:
> JFW homepage: http://www.freedomscientific.com/
> Scripting mailing list:
> http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
> JFW List instructions:
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the
subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from
the list, or
> the
> way the list is being run, do not post them to the list.
Rather contact
> the
> list owner at jfw-admins@xxxxxxxxxxxxxx
>
> --
> JFW related links:
> JFW homepage: http://www.freedomscientific.com/
> Scripting mailing list:
> http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
> JFW List instructions:
> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
> To unsubscribe from this mailing list, send a message to
> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the
subject line.
> Archives located at: //www.freelists.org/archives/jfw
>
> If you have any concerns about the list, post received from
the list, or
> the way the list is being run, do not post them to the list. Rather
> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list:
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the
subject line.
Archives located at: //www.freelists.org/archives/jfw
If you have any concerns about the list, post received from
the list, or the way the list is being run, do not post them
to the list. Rather contact the list owner at
jfw-admins@xxxxxxxxxxxxxx
