Re: Accessible data recovery software

  • From: "Marten Post Uiterweer" <marten@xxxxxxxxxxxx>
  • To: "jfw@xxxxxxxxxxxxx" <jfw@xxxxxxxxxxxxx>
  • Date: Thu, 04 Dec 2008 20:21:13 +0100

Dave,

Install the recover program to an other drive, so no data is overwritten.
As I said: I am using File Scavenger. Not free, but works nice and restores 
full paths.
Without registering, you can only restore 64k.
http://www.quetek.com

Regards, Marten
On Thu, 4 Dec 2008 13:44:20 -0500, dave-d0619 wrote:

>Hello Martin:

>If I install the programs you suggest to an external drive, do they add 
>entries to the Windows registry, add other files to the Windows operating 
>system, Because if they do either of the above, the file allocation table 
>files will be changed and therefore the physical layout of the disk will not 
>be the same.

>So, a piece of software that can be run from a different device, other than 
>the hard drive, and one that does not make changes to the registry, would be 
>ideal.

>I downloaded and tried a data recovery program from ontrack yesterday on a 
>different computer, however, the program was totally inaccessible.

>Ontrack specializes in data recovery.  Their services are not cheap.  To 
>have one of their engineers link to your computer, diagnose what is wrong 
>and give you a report, costs $100.00.  If you give them the go-a-head to 
>recover the data, assuming their report indicates that there is data that 
>can be recovered, the cost can vary from $300.00 to $2,225.00.

>Also the machine is off-limits to you until they have finished the recovery 
>process.  Obvious, when you think about it.

>I used their services several years ago.  They were able to recover the 
>entire contents of the drive.  I think it cost me $400.00, at the time. 
>Worth every penny.

>Unfortunately, I cannot afford those prices at present, which is why I want 
>to try the "do-it-yourself" approach, first!

>I am also going to "google" for this type of software.  I will let you know 
>how I get on.

>In the mean-time, any further suggestions and advice are more than welcome.

>Sincerely:

>Dave Durber

>----- Original Message ----- 
>From: "Marten Post Uiterweer" <marten@xxxxxxxxxxxx>
>To: <jfw@xxxxxxxxxxxxx>
>Sent: Thursday, December 04, 2008 10:56 AM
>Subject: Re: Accessible data recovery software


>>I understand what you mean, but think, it is nesessary to run chkdsk.
>> For recovery, I am using: File Scavenger.
>> Not free, but when restoring, the full path can be restored too.
>> and good accessible.
>>
>> A free alternative, is Restoration, the file is rest2514. It can restore, 
>> but not with the original path.
>> When you pick files to restore, you have to find the restore button with 
>> the mouse or jaws-cursor if using Jaws.
>> You can also restore, with alt-c for restore by copying file to other 
>> location.
>> The recovered file will be restored to an other location, so no other 
>> files are overwritten.
>> You can download it at:
>> http://www.webattack.com/download/dlrestoration.html
>>
>> Regards, Marten
>> On Thu, 4 Dec 2008 10:40:08 -0500, dave-d0619 wrote:
>>
>>>If I run CHKDSK,, the program might decide that the areas where the files 
>>>I
>>>cannot access are bad sectors and delete them from the file allocation
>>>table.
>>
>>>This would also alter the physical layout of the drive, which in turn 
>>>might
>>>make it impossible to use any data file recovery software to recover the
>>>lost files.
>>
>>>Before running CHKDSK, I would like to try and recover the files before
>>>running chkdsk to fix any disk error problems.
>>
>>>Sincerely:
>>
>>>Dave Durber
>>
>>>----- Original Message ----- 
>>>From: "Marten Post Uiterweer" <marten@xxxxxxxxxxxx>
>>>To: <jfw@xxxxxxxxxxxxx>
>>>Sent: Thursday, December 04, 2008 9:36 AM
>>>Subject: Re: Accessible data recovery software
>>
>>
>>>> Have you ran chkdsk?
>>>> Go to a dosbox and type:
>>>> chkdsk /f drive:
>>>>
>>>> Regards, Marten
>>>> On Thu, 4 Dec 2008 08:10:18 -0500, dave-d0619 wrote:
>>>>
>>>>>Hello everyone:
>>>>
>>>>>Due to a computer crash while my hard drive was updating some files, 
>>>>>there
>>>>>are files on the drive which I can no longer access.
>>>>
>>>>>When I check the properties for the hard drive, the amount of space used
>>>>>indicates just under 130GB, which is about what I would expect.
>>>>
>>>>>However, if I highlight all the folders on the hard drive when I am in 
>>>>>the
>>>>>root folder, the amount of used space is 184GB
>>>>
>>>>>Can anyone on the list recommend a suite of programs that I can use that
>>>>>is
>>>>>accessible for recovering the data and to repair the disk.
>>>>
>>>>>I have not made any changes to the drive since the crash.
>>>>
>>>>>I eagerly await any suggestions.
>>>>
>>>>>Sincerely:
>>>>
>>>>>Dave Durber
>>>>
>>>>>--
>>>>>JFW related links:
>>>>>JFW homepage: http://www.freedomscientific.com/
>>>>>Scripting mailing list:
>>>>>http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
>>>>>JFW List instructions:
>>>>>To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>>>>>To unsubscribe from this mailing list, send a message to
>>>>>jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>>>>>Archives located at: //www.freelists.org/archives/jfw
>>>>
>>>>>If you have any concerns about the list, post received from the list, or
>>>>>the way the list is being run, do not post them to the list. Rather
>>>>>contact the list owner
>>>> at jfw-admins@xxxxxxxxxxxxxx
>>>>
>>>>
>>>>
>>>> --
>>>> JFW related links:
>>>> JFW homepage: http://www.freedomscientific.com/
>>>> Scripting mailing list:
>>>> http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
>>>> JFW List instructions:
>>>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>>>> To unsubscribe from this mailing list, send a message to
>>>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>>>> Archives located at: //www.freelists.org/archives/jfw
>>>>
>>>> If you have any concerns about the list, post received from the list, or
>>>> the way the list is being run, do not post them to the list. Rather
>>>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>>>>
>>>>
>>>> -- 
>>>> No virus found in this incoming message.
>>>> Checked by AVG.
>>>> Version: 7.5.552 / Virus Database: 270.9.13/1827 - Release Date: 
>>>> 12/3/2008
>>>> 5:41 PM
>>>>
>>>>
>>
>>>--
>>>JFW related links:
>>>JFW homepage: http://www.freedomscientific.com/
>>>Scripting mailing list: 
>>>http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
>>>JFW List instructions:
>>>To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>>>To unsubscribe from this mailing list, send a message to 
>>>jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>>>Archives located at: //www.freelists.org/archives/jfw
>>
>>>If you have any concerns about the list, post received from the list, or 
>>>the way the list is being run, do not post them to the list. Rather 
>>>contact the list owner
>> at jfw-admins@xxxxxxxxxxxxxx
>>
>>
>>
>> --
>> JFW related links:
>> JFW homepage: http://www.freedomscientific.com/
>> Scripting mailing list: 
>> http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
>> JFW List instructions:
>> To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>> To unsubscribe from this mailing list, send a message to 
>> jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>> Archives located at: //www.freelists.org/archives/jfw
>>
>> If you have any concerns about the list, post received from the list, or 
>> the way the list is being run, do not post them to the list. Rather 
>> contact the list owner at jfw-admins@xxxxxxxxxxxxxx
>>
>>
>> -- 
>> No virus found in this incoming message.
>> Checked by AVG.
>> Version: 7.5.552 / Virus Database: 270.9.13/1827 - Release Date: 12/3/2008 
>> 5:41 PM
>>
>> 

>--
>JFW related links:
>JFW homepage: http://www.freedomscientific.com/
>Scripting mailing list: 
>http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
>JFW List instructions:
>To post a message to the list, send it to jfw@xxxxxxxxxxxxx
>To unsubscribe from this mailing list, send a message to 
>jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
>Archives located at: //www.freelists.org/archives/jfw

>If you have any concerns about the list, post received from the list, or the 
>way the list is being run, do not post them to the list. Rather contact the 
>list owner 
at jfw-admins@xxxxxxxxxxxxxx



--
JFW related links:
JFW homepage: http://www.freedomscientific.com/
Scripting mailing list: 
http://lists.the-jdh.com/listinfo.cgi/scriptography-the-jdh.com
JFW List instructions:
To post a message to the list, send it to jfw@xxxxxxxxxxxxx
To unsubscribe from this mailing list, send a message to 
jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line.
Archives located at: //www.freelists.org/archives/jfw

If you have any concerns about the list, post received from the list, or the 
way the list is being run, do not post them to the list. Rather contact the 
list owner at jfw-admins@xxxxxxxxxxxxxx

Other related posts: