Re: MSN game zone not working for internal clients
- From: "Jim Harrison" <jim@xxxxxxxxxxxx>
- To: "[ISAserver.org Discussion List]" <isalist@xxxxxxxxxxxxx>
- Date: Sun, 4 Aug 2002 07:44:49 -0700
RE: [isalist] Re: Block porn sites from ISA.....I'd agree with you; it sounds
like a routing problem from your WLAN.
Do the WLAN clients show any errors in their FW clients?
Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/authors/harrison/
Read the books!
----- Original Message -----
From: Bob Cheeseman
To: [ISAserver.org Discussion List]
Sent: Friday, August 02, 2002 9:38 AM
Subject: [isalist] Re: MSN game zone not working for internal clients
http://www.ISAserver.org
I discovered quite by trial and error that SecureNAT could not connect to the
game server whilst the Firewall client could. Regardless of the changes and
protocol rules I made. I then went to the clients location and added the
firewall client thinking the problem would be solved. No Luck. :( The problem
seems to lie in the subnetting and routing.
I manage a WLAN covering about 1000 sq. miles all connected wirelessly. Each
POP is a different subnet i.e.: 192.168.2.x, 192.168.3.x, etc. Static routes on
the ISA server allow all the subnets to get an IP address thru DHCP and gain
access to the Internet. The only thing not working is Games servers on subnets
greater than 192.168.1.x. The ISA internal card is bound to 192.168.1.254.
Typical scenario,
customer is behind Dlink Broadband router and has address 192.168.0.100
Dlink LAN side has 192.168.0.1 and WLAN side has address 192.168.3.1 gateway
192.168.3.10
radio connects to POP which has internal of 192.168.3.10 and external of
192.168.1.10 and a static route to 192.168.1.254
Not sure if this helps explain the problem or not.
Thanx,
Bob
-----Original Message-----
From: Jim Harrison [mailto:jim@xxxxxxxxxxxx]
Sent: Friday, August 02, 2002 10:51 AM
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: MSN game zone not working for internal clients
http://www.ISAserver.org
SecureNAT clients are limited to simple protocols; no secondary connections
allowed.
Off-subnet traffic is a different issue; you'll have to enter a manual
route for ISA to talk to those clients.
If you're using RRAS on the ISA, enter them there, otherwise, use a "route
-p add" command to add them.
Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/authors/harrison/
Read the books!
----- Original Message -----
From: Bob Cheeseman
To: [ISAserver.org Discussion List]
Sent: Friday, August 02, 2002 5:02 AM
Subject: [isalist] Re: MSN game zone not working for internal clients
http://www.ISAserver.org
Jim,
What I have found is that a client on the same internal subnet
(192.168.1.x) as the server with the firewall client installed can use games,
but a secure NAT client on the same internal subnet (192.168.1.x) cannot.
Also, a secure NAT client on a different subnet (192.168.3.x) even with the
firewall client cannot connect.
I have many DHCP and static assigned clients on various subnets and use
static routes to give then access. Everything seems to work except MSN Game
Zone.
Could it be that I need to bind an address from each subnet to the
internal card and add it to the local address table?
Any thoughts?
Thanx,
Bob
-----Original Message-----
From: Jim Harrison [mailto:jim@xxxxxxxxxxxx]
Sent: Wednesday, July 31, 2002 11:49 PM
To: [ISAserver.org Discussion List]
Subject: [isalist] Re: MSN game zone not working for internal clients
http://www.ISAserver.org
If you choose one of the first three as the primary port for a new
protocol definition, you can then add a range of ports in the secondary
connections.
Jim Harrison
MCP(NT4, W2K), A+, Network+, PCG
http://isaserver.org/authors/harrison/
Read the books!
----- Original Message -----
From: Bob Cheeseman
To: [ISAserver.org Discussion List]
Sent: Wednesday, July 31, 2002 8:19 PM
Subject: [isalist] MSN game zone not working for internal clients
http://www.ISAserver.org
Hi,
Subject says it all. Login to MSN Game zone tries forever and
connection to server responds with "unspecified error"
Knowledge base says open ports 80,443,6667, and 28800-29100. I
haven't figured out how to open a range of ports however.
Any pointers appreciated.
Thanx,
Bob Cheeseman
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List
as: jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
bob@xxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
bob@xxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
------------------------------------------------------
You are currently subscribed to this ISAserver.org Discussion List as:
jim@xxxxxxxxxxxx
To unsubscribe send a blank email to $subst('Email.Unsub')
Other related posts:
