[PCB_FORUM] Re: ECL report in Allegro V15.2

Gary,
 
When in Allegro access the old reports UI with the command old_reports.
The env var controls the reports.exe batch program.
 
John


________________________________

        From: Gary MacIndoe [mailto:gary.macindoe@xxxxxxx] 
        Sent: Wednesday, March 23, 2005 11:08 AM
        To: icu-pcb-forum@xxxxxxxxxxxxx
        Subject: [PCB_FORUM] Re: ECL report in Allegro V15.2
        
        
        Jerry,
         
        Hmmm... I can set "allegro_old_report" under Misc. in User
Preferences, and all it does is set the reports to text based, not HTML.
It has nothing to do with the selection of reports.
         
        The problem is not being able to run the old "ecl short" report.
         

        Gary E. MacIndoe
        PCB Design Engineer
        Advanced Micro Devices, Inc.
        Longmont, Colorado
        

                -----Original Message-----
                From: Schwartz, Jerome [mailto:jschwa01@xxxxxxxxxx]
                Sent: Wednesday, March 23, 2005 8:44 AM
                To: 'icu-pcb-forum@xxxxxxxxxxxxx'
                Subject: [PCB_FORUM] Re: ECL report in Allegro V15.2
                
                
                Gary,
                 
                    On a UNIX platform I set the variable
ALLEGRO_OLD_REPORT to run the old style
                reports in a shell tool. The ECL, long and short,
reports are still there.
                 
                

                 Regards,
                      Jerry Schwartz, CID+
                      IPC Advanced Certified Designer
                     "May The Schwartz Be With You."
                
                Designer 3
                Harris Corporation GCSD              Voice
(321)-727-5474
                P.O. Box 37, MS 1/3232               Pager
(321)-690-9797
                Melbourne, FL 32902-0037           
                mailto:Jerome.Schwartz@xxxxxxxxxx           
                http://www.harris.com <http://www.harris.com/> 
                
                


                        -----Original Message-----
                        From: Gary MacIndoe
[mailto:gary.macindoe@xxxxxxx] 
                        Sent: Wednesday, March 23, 2005 10:32 AM
                        To: icu-pcb-forum@xxxxxxxxxxxxx
                        Subject: [PCB_FORUM] Re: ECL report in Allegro
V15.2
                        
                        
                        Kesavan,
                         
                        Wow, I have used this method for years to
compare the lengths of selected nets (put "ecl" property on nets to
compare, then just run the "ecl short" (or "ecl long") report)).
                         
                        It looks like you can still put the "ecl"
property on a net, but there are no ecl (short or long) reports
available to run.  Looks like maybe they are forcing us to use CM.
                         
                        They now have the report "Etch Length by Net
Report", which lists all nets.  It is in alpha/numeric order of net
name, not listed by net length.
                         
                        Maybe someone out there knows how to do it on
15.2.  Good luck!
                         

                        Gary E. MacIndoe
                        PCB Design Engineer
                        Advanced Micro Devices, Inc.
                        Longmont, Colorado
                        

                                -----Original Message-----
                                From: Kesavan [mailto:Kesavan@xxxxxxxx]
                                Sent: Wednesday, March 23, 2005 12:35 AM
                                To: icu-pcb-forum@xxxxxxxxxxxxx
                                Subject: [PCB_FORUM] ECL report in
Allegro V15.2
                                
                                
                                HI everyone,
                                
                                Please tell me how can I generate ECL
report in Allegro ver 15.2, as 
                                we did in Allegro ver 14.2. I used this
property to check NET 
                                LENGTHS without using any EXCEL PROCESS
and even without knowing the 
                                name of particular NETS in 14.2. 
                                
                                How can I generate ECL report in Allegro
ver 15.2.
                                
                                Now what is the use ECL property.
                                
                                Thanks in Advance.
                                
                                Kesavan.T
                                 

        
-----------------------------------------Disclaimer---------------------
----------------------------------
                                
                                This document is intended for
transmission to the named recipient only.If you are not that 
                                person, you should note that legal
rights reside in this document and your are not authorized
                                to access, read, disclose, copy, use or
otherwise deal with it and any such actions are prohibited 
                                and may be unlawful.The views expressed
in this document are not necessarily those of HCL Peripherals 
                                Notice is hereby given that no
representation, contract or other binding obligation shall be created
                                by this e-mail, which must be
interpreted accordingly.Any representations, contractual rights or
                                obligations shall be separately
communicated in writing and signed in the original by a duly authorized
                                officer of the relevant company.
                                
        
------------------------------------------------------------------------
----------------------------------

Other related posts: