Gary, On a UNIX platform I set the variable ALLEGRO_OLD_REPORT to run the old style reports in a shell tool. The ECL, long and short, reports are still there. Regards, Jerry Schwartz, CID+ IPC Advanced Certified Designer "May The Schwartz Be With You." Designer 3 Harris Corporation GCSD Voice (321)-727-5474 P.O. Box 37, MS 1/3232 Pager (321)-690-9797 Melbourne, FL 32902-0037 mailto:Jerome.Schwartz@xxxxxxxxxx <mailto:Jerome.Schwartz@xxxxxxxxxx> http://www.harris.com <http://www.harris.com/> -----Original Message----- From: Gary MacIndoe [mailto:gary.macindoe@xxxxxxx] Sent: Wednesday, March 23, 2005 10:32 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Re: ECL report in Allegro V15.2 Kesavan, Wow, I have used this method for years to compare the lengths of selected nets (put "ecl" property on nets to compare, then just run the "ecl short" (or "ecl long") report)). It looks like you can still put the "ecl" property on a net, but there are no ecl (short or long) reports available to run. Looks like maybe they are forcing us to use CM. They now have the report "Etch Length by Net Report", which lists all nets. It is in alpha/numeric order of net name, not listed by net length. Maybe someone out there knows how to do it on 15.2. Good luck! Gary E. MacIndoe PCB Design Engineer Advanced Micro Devices, Inc. Longmont, Colorado -----Original Message----- From: Kesavan [mailto:Kesavan@xxxxxxxx] Sent: Wednesday, March 23, 2005 12:35 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] ECL report in Allegro V15.2 HI everyone, Please tell me how can I generate ECL report in Allegro ver 15.2, as we did in Allegro ver 14.2. I used this property to check NET LENGTHS without using any EXCEL PROCESS and even without knowing the name of particular NETS in 14.2. How can I generate ECL report in Allegro ver 15.2. Now what is the use ECL property. Thanks in Advance. Kesavan.T -----------------------------------------Disclaimer----------------------------- -------------------------- This document is intended for transmission to the named recipient only.If you are not that person, you should note that legal rights reside in this document and your are not authorized to access, read, disclose, copy, use or otherwise deal with it and any such actions are prohibited and may be unlawful.The views expressed in this document are not necessarily those of HCL Peripherals Notice is hereby given that no representation, contract or other binding obligation shall be created by this e-mail, which must be interpreted accordingly.Any representations, contractual rights or obligations shall be separately communicated in writing and signed in the original by a duly authorized officer of the relevant company. -------------------------------------------------------------------------------- --------------------------