[PCB_FORUM] Re: ECL report in Allegro V15.2

Kesavan,

Wow, I have used this method for years to compare the lengths of selected
nets (put "ecl" property on nets to compare, then just run the "ecl short"
(or "ecl long") report)).

It looks like you can still put the "ecl" property on a net, but there are
no ecl (short or long) reports available to run.  Looks like maybe they are
forcing us to use CM.

They now have the report "Etch Length by Net Report", which lists all nets.
It is in alpha/numeric order of net name, not listed by net length.

Maybe someone out there knows how to do it on 15.2.  Good luck!

Gary E. MacIndoe
PCB Design Engineer
Advanced Micro Devices, Inc.
Longmont, Colorado


  -----Original Message-----
  From: Kesavan [mailto:Kesavan@xxxxxxxx]
  Sent: Wednesday, March 23, 2005 12:35 AM
  To: icu-pcb-forum@xxxxxxxxxxxxx
  Subject: [PCB_FORUM] ECL report in Allegro V15.2


  HI everyone,

  Please tell me how can I generate ECL report in Allegro ver 15.2, as
  we did in Allegro ver 14.2. I used this property to check NET
  LENGTHS without using any EXCEL PROCESS and even without knowing the
  name of particular NETS in 14.2.

  How can I generate ECL report in Allegro ver 15.2.

  Now what is the use ECL property.

  Thanks in Advance.

  Kesavan.T


  -----------------------------------------Disclaimer-----------------------
--------------------------------

  This document is intended for transmission to the named recipient only.If
you are not that
  person, you should note that legal rights reside in this document and your
are not authorized
  to access, read, disclose, copy, use or otherwise deal with it and any
such actions are prohibited
  and may be unlawful.The views expressed in this document are not
necessarily those of HCL Peripherals
  Notice is hereby given that no representation, contract or other binding
obligation shall be created
  by this e-mail, which must be interpreted accordingly.Any representations,
contractual rights or
  obligations shall be separately communicated in writing and signed in the
original by a duly authorized
  officer of the relevant company.

  --------------------------------------------------------------------------
--------------------------------

Other related posts: