Hello Uri, please stop advertising your programs at this forum. We do not tolerate any type of solicitation or 3rd part promotions or advertisments Failure to comply will result in your removal from this forum. Andy PS: Why don't you share your great programs with all of us or post them on sourcelink.cadence.com... Uri Chaplianka Sent by: 03/16/2005 02:51 AM Please respond to icu-pcb-forum@xxxxxxxxxxxxx To cc Subject [PCB_FORUM] Re: Allegro 15.2 so59- Via Issue Hi ! 1 - About vias. It not new, I remember it from v14.2 when I place via and any plane exist it immediately connect to his net. And when exist many ground vias and I delete ground plane they will be or connected to other plane or unconnected. Because this problem I create SKILL "ASSIGN_NET" and now you can with 2 clicks connect all vias that you need ( by window or group ) to net that you need. On http://skill.freespaces.com/ see how ASSIGN_NET on Video Demo's. Regards, Uri Chaplin Senior PCB Designer e-mail : chaplin.u@xxxxxxxxx From: Scott, Ron [mailto:rg-scott@xxxxxx] Sent: Wednesday, March 16, 2005 1:43 AM To: icu-pcb-forum@xxxxxxxxxxxxx Subject: [PCB_FORUM] Allegro 15.2 so59- Via Issue All, I recently downloaded the current ISR and now some unsavory things have happened: 1. If I have a standalone via, it is assigned a ground net charateristic. I like to group vias when working with power distribution but it doesn't do me any good when all the standalone vias are ground. 2. Very elementary, but I can't add vias to my via list. I can physically add them to the chart but they don't show up in the design drop down. What happened? Regards, Ron Scott C.I.D. Texas Instruments Storage Products Group Tel: 214.567.4715 Cell: 972.816.7978 rg-scott@xxxxxx