[gps-talkusers] Re: GPS Version 3 changes
- From: Peggy Kern <kernsac@xxxxxxxxxxxxx>
- To: gps-talkusers@xxxxxxxxxxxxx
- Date: Mon, 28 Jun 2004 19:09:02 -0700
Mike, when can those of us who won't be at one of the conventions place our
orders for GPS 3? I'd love to get my hands on it before going to Portland
in mid-July, but understand that's probably not realistic with it just
coming out. But some kind of idea as to when and how to order it for
someone not going to a convention would be simply mah-velous. <smile>
Peggy
At 09:39 AM 6/28/2004 -0700, you wrote:
>Well, BrailleNote GPS version 3 is almost here, close enough to being out
>that we can tell you everything that is in this version versus version 2.
>We will be taking orders at the Summer shows and shipping right afterwards
>and possibly at the shows for those we see in person.
>
>Thanks to this list for lots of great suggestions and to an incredible
>testing team. The list of changes here represents a huge incremental
>advance over version 2 and yet there are still things we have reserved for
>a version 4. And, of course, I am sure you will tell us what else we can
>improve upon.
>Mike
>
>Version 3 Changes, June 26, 2004
>
>BrailleNote GPS Version 3 improves upon Address Matching, Automatic Route
>Calculation, Look-Around mode, Points of Interest functionality as well as
>incorporating newer POI and map data. A brand new Virtual Explore mode has
>been added. A host of smaller feature and quality improvements have also
>been implemented.
>
>The following is a cryptic list of these changes in Version 3 versus
>Version 2. A better understanding of these items can be found by reading
>them in context within the user manual. Remember that we use the word
>"chord" to refer to a Space plus a letter or dots on the Braille keyboard
>and to the Control key plus a key on the QT keyboard.
>
>Advanced POI Search: Chord F
>The software now remembers the distance interval and expands by that
>interval. For example, if you search from 0 to 25 miles, subsequent
>expansions on that search will be in 25-mile increments.
>
>When doing a POI Advanced Search you are presented with a list of
>categories. The Default category is "All." You can scroll through the
>category list or use the first letter of a category to hop directly to a
>specific item. It remembers the last category used, but defaults to the ALL
>category every time you enter the GPS program.
>
>Some POIs also have sub category names. If you enter the word "Wreck" in
>the POI search string, you will find the sub category "Wrecks" within the
>Marine category. Not all categories have data yet.
>
>New Look Around Features: Chord M
>When you turn on the Look-Around mode, you are presented with the POI
>categories as well as the option for intersections to trigger automatically
>or not. The default is "All POIS including intersections." If you select a
>category, it will be remembered for Look-Around mode until you exit the GPS
>program. The POI Categories include the User POI category.
>
>At the same time Look-Around mode looks for nearby POIs, it now searches
>for intersections within 200 feet when you are traveling under 15 miles per
>hour. You can choose to look around for POIs only, Intersections only, or
>both.
>
>New prompt:
>When you start the GPS program, with the receiver turned off or
>disconnected, you now hear, "Turn on your GPS receiver or press V for
>Virtual Mode."
>
>The GPS Menu has a new item to take you directly to the GPS User's manual.
>
>If you select a route calculation that has a destination over 100 miles
>away from the starting position, you receive a warning that the route will
>take a long time to calculate so you have the option to cancel.
>
>Sendero will now provide a monthly compilation of all User POI files sent
>to the company. A utility has been created to compress the User.POI files
>into a merged User.BPI file. This User POI file will be made available by
>email and/or on the Sendero web site for version 3 users. The first of
>these files is included with the new POIs. Users are encouraged to submit
>their POIs to Sendero to be added to the collective user database at the
>beginning of each month.
>
> Command Changes:
>
>B and Chord B for Pedometer now impact GPS and Explore modes independently.
>
>C now announces other map features in addition to City/State/Zip. If you
>are in a bay for example, it will announce the name of that body of water
>if it is in the map database. You will hear it after the city name and
>before the state and zip. You may also hear a county name, college campus
>or park announced.
>
>Chord C is a new command that announces a complete list of available map
>features for a location. These include the road classification, speed
>limit, number of lanes, address range on each side of the road, city,
>surrounding borough or other similar classification if there is one,
>county, country and zip.
>
>Record POI on the QT is now Control R. It used to be Control P.
>
>Record POI on the BT is SPACE with Dot 3.
>
>Chord P now announces POI details like phone number and address on both the
>BT and QT.
>
>The letter P announces the POI name, just as it did before.
>
>Chord X announces intersection details like which street you are on and the
>compass orientation of the cross streets.
>
>Chord D now sets an Explore position as a destination in addition to its
>previous function of setting a waypoint or Point of Interest as a
>Destination. Simply press Chord D after exploring the map in virtual mode
>and the name of the intersection will be set as your destination. Be aware
>that if a Point of Interest should trigger from the Look Around mode, it
>could be tagged as your destination unless you press the X key or Explore
>Left, Right or Forward first.
>
>Version 3 also has a slight difference in the W & Chord W commands in GPS
>mode. Each time you press W, the total distance to that waypoint is added
>to the previous waypoints in your route.
>
>In virtual mode this behaves like it did before. So this means if you want
>to virtually walk to route and find out how far each section of the route
>is enter virtual mode and use the W / CHORD W keys. Since W really moves
>the current waypoint, it only makes sense in GPS mode that it gives you the
>distance and heading from your GPS position and not from the previous point
>in the route.
>
>Z, Altitude, now says "near sea level" when you are within 100 feet of sea
>level.
>
>Virtual Explore mode commands
>
>Turn Left, BT dots 23, QT Control Left Arrow
>Turn Right, Dots 56, QT Control Right Arrow
>Forward one Intersection, BT Dots 2356, QT Control Up Arrow
>Back up one intersection only, BT SPACE with Dots 2356, QT Control Down Arrow
>
>Improvements in address searching
>
>No Township:
>Many of the Township city names have been merged into their respective city
>names.
>
>Cross Streets:
>If the address you enter is not found during an Address search, a list of
>cross streets will be presented. An alternate street number will be
>presented, which you can select by pressing Escape, SPACE with Z on the BT
>keyboard. Note, if you do not enter a street address, the cross street
>list will also be presented.
>
>The cross street list in the Address matching mode is not completely in
>order. You will find that sections of streets are in order but not the
>entire cross-street list. The purpose of this list is so that the user
>has a choice of potential cross streets if an address number is not
>available. If one needs to see the exact layout of cross streets, the
>Virtual Explore mode can provide this.
>
>Address Matching Improved:
>Successful City, street name and street number matching is now much better.
>When traveling on a train, cities can now be announced.
>
>Automatic Route Calculation:
>A number of programming changes have been made to improve automatic routes.
>
>Accessing lists by letter:
>When selecting a POI Category, City, Street or Cross Street from a list of
>choices you can either scroll through the list as before or use any letter
>A-Z to hop directly to items beginning with that letter. By pressing the
>same letter repeatedly you will scroll through the list of items beginning
>with that letter. Once you reach the end of the list with items beginning
>with that letter pressing the same letter again will repeat the process over.
>
>Distance calculations are even more precise.
>
>Two additional digits have been added to the latitude/longitude
>announcement. Press the letter, Y.
>
>POI searches have been sped up. Selecting a POI category increases searches
>even more.
>
>Version 3 announces "A Shoreline" or "A Railroad." These two classes of
>data have been added to the announcements but automatic routes will not
>route you on to a shoreline or a railroad. The name of the body of water
>associated with that shoreline will be announced if it is in the data.
>
>Maps now have the complete state name and not its 2-letter abbreviation.
>Remember this when entering the state in the first field of an address
>search. Enter DC however for the District of Columbia.
>
>Spell mode now slows down the speech so you can hear each letter more easily.
>
>When you are within 12 feet or less of a point or destination, the
>announcement now simply says, "Near" instead of giving you the heading and
>distance.
>
>Changes in GPS Receiver Types:
>The Default GPS receiver type set under the GPS Options Menu is now "Serial
>GPS." This mode is recommended for the Earthmate receiver. It provides a
>slight improvement in processing time over the Magellan receiver type. An
>option for a Compact Flash GPS receiver type has also been added although
>the current models are not as good as the Earthmate.
>
>Improved Map Data:
>The street map data is now current through Q1 2004, well over a year newer
>than the Version 2 maps. The U.S. is now over 4.8 GB, 12% larger. New maps
>for Europe are being released. Canada is available for the first time.
>
>Increased POI data and functionality:
>Our POI database has increased from 750,000 points in the U.S. to over a
>million points of interest. Points are included for Guam, Puerto Rico and
>nearby islands as well as a smattering of points in countries around the
>world. Detailed information is available for many of these points such as
>address and phone number. New POI categories have been added like highway
>exits, large medium and small cities, hospitals and more. If you don't find
>a city easily during an address search, use the POI search to find it.
>
>See the ReadMe, audio tutorial, User manual and receiver Getting Started
>documents for more details.
mailto:kernsac@xxxxxxxxxxxxx
http://www.home.earthlink.net/~kernsac
MSN Messenger kernsac@xxxxxxxxxxxxx
Other related posts:
