np, g, I need to get with you so we can do the rebates chuq On Sun, 2009-11-22 at 10:50 -0500, Richard Zimmerman wrote: > Oh, ok... I had realized the plan changed that way... The last I heard > we were installing light switches under the furnace, etc... > > My bad, my apologies... > > Richard > > > Chuq wrote: > > we are not using new switches. but as far as plugging them into > > existing outlets the will not reach we will originate from the > > existing outlet. that is how we will wire up the lights. > > chuq > > > > On Sat, 2009-11-21 at 23:39 -0500, Richard Zimmerman wrote: > >> Why do we need all that stuff? Wire up the lights, plug them into the > >> existing plugs and use the existing light switch... We don not need > >> extra light switches in the work area... > >> > >> Richard > >> > >> > >> chuq jackels wrote: > >> > Well actually what all we need is: Conduit, 4 junction boxes, wire, > >> > wirenuts, tape, chain, & 4 outlets, covers. > >> > So a Shopping trip will be in order between now and then. > >> > Chuq > >> > > >> > On Sat, Nov 21, 2009 at 1:13 PM, john jones <rainman121065@xxxxxxxxx > >> > <mailto:rainman121065@xxxxxxxxx> > >> > <mailto:rainman121065@xxxxxxxxx>> wrote: > >> > > >> > well all we need is hardwirring and chain for that and a switchbox > >> > ive got connectors and light switches should be pretty ez > >> > > >> > > >> > --- On *Sat, 11/21/09, chuq jackels /<chuq00@xxxxxxxxx > >> > <mailto:chuq00@xxxxxxxxx> > >> > <mailto:chuq00@xxxxxxxxx>>/* wrote: > >> > > >> > > >> > From: chuq jackels <chuq00@xxxxxxxxx <mailto:chuq00@xxxxxxxxx> > >> > <mailto:chuq00@xxxxxxxxx>> > >> > Subject: [frgeek-michiana] Re: Warehouse > >> > > >> > To: frgeek-michiana@xxxxxxxxxxxxx > >> > <mailto:frgeek-michiana@xxxxxxxxxxxxx> > >> > <mailto:frgeek-michiana@xxxxxxxxxxxxx> > >> > Date: Saturday, November 21, 2009, 10:09 AM > >> > > >> > > >> > Phil and I were the only ones there, we cleaned the garage > >> > door, and started assembling the blue shelving. > >> > Other than that nothing. We are going to be closed all next > >> > week I believe due to the holidays and travel plans. > >> > The goal is to gather the electrical supplies needed between > >> > now and then so when we come back we are able to start hanging > >> > lights. > >> > Chuq > >> > > >> > Sent from South Bend, IN, United States > >> > > >> > On Sat, Nov 21, 2009 at 12:22 PM, john jones > >> > <rainman121065@xxxxxxxxx <mailto:rainman121065@xxxxxxxxx> > >> > <http://mc/compose?to=rainman121065@xxxxxxxxx>> wrote: > >> > > >> > What did i miss at the warehouse Thursday,did the lights > >> > get hung yet? > >> > > >> > --- On *Fri, 11/20/09, Mike Cook /<mikecook@xxxxxxxxxxxx > >> > <mailto:mikecook@xxxxxxxxxxxx> > >> > <http://mc/compose?to=mikecook@xxxxxxxxxxxx>>/* wrote: > >> > > >> > > >> > From: Mike Cook <mikecook@xxxxxxxxxxxx > >> > <mailto:mikecook@xxxxxxxxxxxx> > >> > <http://mc/compose?to=mikecook@xxxxxxxxxxxx>> > >> > Subject: [frgeek-michiana] Re: Device inventory software > >> > To: frgeek-michiana@xxxxxxxxxxxxx > >> > <mailto:frgeek-michiana@xxxxxxxxxxxxx> > >> > <http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx> > >> > Date: Friday, November 20, 2009, 8:30 AM > >> > > >> > There may be better software out there, slinkydetect > >> > is fairly old (2003). I haven't found it yet though. > >> > > >> > Mike > >> > > >> > -----Original Message----- > >> > From: chuq jackels > >> > Sent: Nov 19, 2009 5:22 PM > >> > To: frgeek-michiana@xxxxxxxxxxxxx > >> > <mailto:frgeek-michiana@xxxxxxxxxxxxx> > >> > <http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx> > >> > Subject: [frgeek-michiana] Re: Device inventory > >> > software > >> > > >> > Slinkydetect would be useful and we could have the > >> > generated machineID# go to the barcode # of each > >> > system that we assemble. It would make for a good > >> > way of logging each system incase someone at some > >> > point in time has a hardware failure we can just > >> > look them up and know exactly what is in that > >> > system and will know which parts would be needed > >> > to repair it. > >> > > >> > Chuq > >> > > >> > > >> > Sent from South Bend, IN, United States > >> > > >> > On Thu, Nov 19, 2009 at 3:12 PM, Mike Cook > >> > <mikecook@xxxxxxxxxxxx <mailto:mikecook@xxxxxxxxxxxx> > >> > <http://mc/compose?to=mikecook@xxxxxxxxxxxx>> wrote: > >> > > >> > This is what I was referring to. > >> > > >> > Slinkydetect, an HW detection floppy > >> > http://www.rule-project.org/?q=node/4 > >> > > >> > From The Rule Project > >> > http://www.rule-project.org > >> > > >> > Mike > >> > > >> > -----Original Message----- > >> > >From: Tom Brown <tbrown@xxxxxxxxxxxx > >> > <mailto:tbrown@xxxxxxxxxxxx> > >> > <http://mc/compose?to=tbrown@xxxxxxxxxxxx>> > >> > >Sent: Nov 19, 2009 12:08 PM > >> > >To: frgeek-michiana@xxxxxxxxxxxxx > >> > <mailto:frgeek-michiana@xxxxxxxxxxxxx> > >> > > >> > <http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx> > >> > >Subject: [frgeek-michiana] Re: [Fwd: TxMicro > >> > :: Motherboard Accessories :: Diagnostic PCI > >> > Card for Mboards] > >> > > > >> > >Looks good to me. > >> > > > >> > >On a related note: Mike mentioned to me a > >> > while back software that will > >> > >inventory the devices on a system which would > >> > be good for record keeping > >> > >at final finish. > >> > > > >> > >Tom > >> > > > >> > >Richard Zimmerman wrote: > >> > >> I would like to put forward to the board a > >> > formal request to purchase > >> > >> a few of these so we can significantly > >> > improve our troubleshooting of > >> > >> incoming computers and lower the amount of > >> > time in which it takes to > >> > >> do it. > >> > >> > >> > >> Many thanks for considering this... > >> > >> > >> > >> Richard > >> > >> > >> > >> > >> > >> -------- Original Message -------- > >> > >> Subject: TxMicro :: Motherboard > >> > Accessories :: Diagnostic PCI Card > >> > >> for Mboards > >> > >> Date: Wed, 18 Nov 2009 12:41:26 -0500 > >> > >> From: Richard Zimmerman > >> > <richard@xxxxxxxxxxxx > >> > <mailto:richard@xxxxxxxxxxxx> > >> > <http://mc/compose?to=richard@xxxxxxxxxxxx>> > >> > >> Reply-To: richard@xxxxxxxxxxxx > >> > <mailto:richard@xxxxxxxxxxxx> > >> > <http://mc/compose?to=richard@xxxxxxxxxxxx> > >> > >> Organization: K&B Transport Inc > >> > >> To: csxt@xxxxxxxxxxx > >> > <mailto:csxt@xxxxxxxxxxx> > >> > <http://mc/compose?to=csxt@xxxxxxxxxxx> > >> > >> > >> > >> > >> > >> > >> > >> > >> > > >> > http://www.txmicro.com/Diagnostic-PCI-Card-for-Mboards-p-4318.html > >> > >> > >> > > > >> > >** This list is PUBLICLY archived. ** > >> > >PLEASE don't post personal or sensitive > >> > information unless you wish for it to be in > >> > the public domain. > >> > > > >> > >To visit the main website for Free Geek > >> > Michiana go to http://www.freegeekmichiana.org > >> > > > >> > >To post to the list send email to > >> > frgeek-michiana@xxxxxxxxxxxxx > >> > <mailto:frgeek-michiana@xxxxxxxxxxxxx> > >> > > >> > <http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx>. > >> > >The archive is available at > >> > > >> > //www.freelists.org/archives/frgeek-michiana/ > >> > > > >> > >You may unsubscribe or change your list > >> > settings by going to the list website at > >> > //www.freelists.org/webpage/frgeek-michiana > >> > > > >> > > >> > ** This list is PUBLICLY archived. ** > >> > PLEASE don't post personal or sensitive > >> > information unless you wish for it to be in > >> > the public domain. > >> > > >> > To visit the main website for Free Geek > >> > Michiana go to http://www.freegeekmichiana.org > >> > > >> > To post to the list send email to > >> > frgeek-michiana@xxxxxxxxxxxxx > >> > <mailto:frgeek-michiana@xxxxxxxxxxxxx> > >> > > >> > <http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx>. > >> > The archive is available at > >> > > >> > //www.freelists.org/archives/frgeek-michiana/ > >> > > >> > You may unsubscribe or change your list > >> > settings by going to the list website at > >> > //www.freelists.org/webpage/frgeek-michiana > >> > > >> > > >> > ** This list is PUBLICLY archived. ** PLEASE don't > >> > post personal or sensitive information unless you wish > >> > for it to be in the public domain. To visit the main > >> > website for Free Geek Michiana go to > >> > http://www.freegeekmichiana.org To post to the list > >> > send email to frgeek-michiana@xxxxxxxxxxxxx > >> > <mailto:frgeek-michiana@xxxxxxxxxxxxx> > >> > <http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx>. > >> > The archive is available at > >> > //www.freelists.org/archives/frgeek-michiana/ You > >> > may unsubscribe or change your list settings by going > >> > to the list website at > >> > //www.freelists.org/webpage/frgeek-michiana > >> > > >> > > >> > > >> > > >> > > >> > >> > >> > > > >