[frgeek-michiana] Re: Warehouse
- From: Chuq <chuq00@xxxxxxxxx>
- To: frgeek-michiana@xxxxxxxxxxxxx
- Date: Sun, 22 Nov 2009 09:09:56 -0500
we are not using new switches. but as far as plugging them into existing
outlets the will not reach we will originate from the existing outlet.
that is how we will wire up the lights.
chuq
On Sat, 2009-11-21 at 23:39 -0500, Richard Zimmerman wrote:
> Why do we need all that stuff? Wire up the lights, plug them into the
> existing plugs and use the existing light switch... We don not need
> extra light switches in the work area...
>
> Richard
>
>
> chuq jackels wrote:
> > Well actually what all we need is: Conduit, 4 junction boxes, wire,
> > wirenuts, tape, chain, & 4 outlets, covers.
> > So a Shopping trip will be in order between now and then.
> > Chuq
> >
> > On Sat, Nov 21, 2009 at 1:13 PM, john jones <rainman121065@xxxxxxxxx
> > <mailto:rainman121065@xxxxxxxxx>> wrote:
> >
> > well all we need is hardwirring and chain for that and a switchbox
> > ive got connectors and light switches should be pretty ez
> >
> >
> > --- On *Sat, 11/21/09, chuq jackels /<chuq00@xxxxxxxxx
> > <mailto:chuq00@xxxxxxxxx>>/* wrote:
> >
> >
> > From: chuq jackels <chuq00@xxxxxxxxx <mailto:chuq00@xxxxxxxxx>>
> > Subject: [frgeek-michiana] Re: Warehouse
> >
> > To: frgeek-michiana@xxxxxxxxxxxxx
> > <mailto:frgeek-michiana@xxxxxxxxxxxxx>
> > Date: Saturday, November 21, 2009, 10:09 AM
> >
> >
> > Phil and I were the only ones there, we cleaned the garage
> > door, and started assembling the blue shelving.
> > Other than that nothing. We are going to be closed all next
> > week I believe due to the holidays and travel plans.
> > The goal is to gather the electrical supplies needed between
> > now and then so when we come back we are able to start hanging
> > lights.
> > Chuq
> >
> > Sent from South Bend, IN, United States
> >
> > On Sat, Nov 21, 2009 at 12:22 PM, john jones
> > <rainman121065@xxxxxxxxx
> > <http://mc/compose?to=rainman121065@xxxxxxxxx>> wrote:
> >
> > What did i miss at the warehouse Thursday,did the lights
> > get hung yet?
> >
> > --- On *Fri, 11/20/09, Mike Cook /<mikecook@xxxxxxxxxxxx
> > <http://mc/compose?to=mikecook@xxxxxxxxxxxx>>/* wrote:
> >
> >
> > From: Mike Cook <mikecook@xxxxxxxxxxxx
> > <http://mc/compose?to=mikecook@xxxxxxxxxxxx>>
> > Subject: [frgeek-michiana] Re: Device inventory software
> > To: frgeek-michiana@xxxxxxxxxxxxx
> > <http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx>
> > Date: Friday, November 20, 2009, 8:30 AM
> >
> > There may be better software out there, slinkydetect
> > is fairly old (2003). I haven't found it yet though.
> >
> > Mike
> >
> > -----Original Message-----
> > From: chuq jackels
> > Sent: Nov 19, 2009 5:22 PM
> > To: frgeek-michiana@xxxxxxxxxxxxx
> > <http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx>
> > Subject: [frgeek-michiana] Re: Device inventory
> > software
> >
> > Slinkydetect would be useful and we could have the
> > generated machineID# go to the barcode # of each
> > system that we assemble. It would make for a good
> > way of logging each system incase someone at some
> > point in time has a hardware failure we can just
> > look them up and know exactly what is in that
> > system and will know which parts would be needed
> > to repair it.
> >
> > Chuq
> >
> >
> > Sent from South Bend, IN, United States
> >
> > On Thu, Nov 19, 2009 at 3:12 PM, Mike Cook
> > <mikecook@xxxxxxxxxxxx
> > <http://mc/compose?to=mikecook@xxxxxxxxxxxx>> wrote:
> >
> > This is what I was referring to.
> >
> > Slinkydetect, an HW detection floppy
> > http://www.rule-project.org/?q=node/4
> >
> > From The Rule Project
> > http://www.rule-project.org
> >
> > Mike
> >
> > -----Original Message-----
> > >From: Tom Brown <tbrown@xxxxxxxxxxxx
> > <http://mc/compose?to=tbrown@xxxxxxxxxxxx>>
> > >Sent: Nov 19, 2009 12:08 PM
> > >To: frgeek-michiana@xxxxxxxxxxxxx
> > <http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx>
> > >Subject: [frgeek-michiana] Re: [Fwd: TxMicro
> > :: Motherboard Accessories :: Diagnostic PCI
> > Card for Mboards]
> > >
> > >Looks good to me.
> > >
> > >On a related note: Mike mentioned to me a
> > while back software that will
> > >inventory the devices on a system which would
> > be good for record keeping
> > >at final finish.
> > >
> > >Tom
> > >
> > >Richard Zimmerman wrote:
> > >> I would like to put forward to the board a
> > formal request to purchase
> > >> a few of these so we can significantly
> > improve our troubleshooting of
> > >> incoming computers and lower the amount of
> > time in which it takes to
> > >> do it.
> > >>
> > >> Many thanks for considering this...
> > >>
> > >> Richard
> > >>
> > >>
> > >> -------- Original Message --------
> > >> Subject: TxMicro :: Motherboard
> > Accessories :: Diagnostic PCI Card
> > >> for Mboards
> > >> Date: Wed, 18 Nov 2009 12:41:26 -0500
> > >> From: Richard Zimmerman
> > <richard@xxxxxxxxxxxx
> > <http://mc/compose?to=richard@xxxxxxxxxxxx>>
> > >> Reply-To: richard@xxxxxxxxxxxx
> > <http://mc/compose?to=richard@xxxxxxxxxxxx>
> > >> Organization: K&B Transport Inc
> > >> To: csxt@xxxxxxxxxxx
> > <http://mc/compose?to=csxt@xxxxxxxxxxx>
> > >>
> > >>
> > >>
> > >>
> >
> > http://www.txmicro.com/Diagnostic-PCI-Card-for-Mboards-p-4318.html
> > >>
> > >
> > >** This list is PUBLICLY archived. **
> > >PLEASE don't post personal or sensitive
> > information unless you wish for it to be in
> > the public domain.
> > >
> > >To visit the main website for Free Geek
> > Michiana go to http://www.freegeekmichiana.org
> > >
> > >To post to the list send email to
> > frgeek-michiana@xxxxxxxxxxxxx
> >
> > <http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx>.
> > >The archive is available at
> > //www.freelists.org/archives/frgeek-michiana/
> > >
> > >You may unsubscribe or change your list
> > settings by going to the list website at
> > //www.freelists.org/webpage/frgeek-michiana
> > >
> >
> > ** This list is PUBLICLY archived. **
> > PLEASE don't post personal or sensitive
> > information unless you wish for it to be in
> > the public domain.
> >
> > To visit the main website for Free Geek
> > Michiana go to http://www.freegeekmichiana.org
> >
> > To post to the list send email to
> > frgeek-michiana@xxxxxxxxxxxxx
> >
> > <http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx>.
> > The archive is available at
> > //www.freelists.org/archives/frgeek-michiana/
> >
> > You may unsubscribe or change your list
> > settings by going to the list website at
> > //www.freelists.org/webpage/frgeek-michiana
> >
> >
> > ** This list is PUBLICLY archived. ** PLEASE don't
> > post personal or sensitive information unless you wish
> > for it to be in the public domain. To visit the main
> > website for Free Geek Michiana go to
> > http://www.freegeekmichiana.org To post to the list
> > send email to frgeek-michiana@xxxxxxxxxxxxx
> > <http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx>.
> > The archive is available at
> > //www.freelists.org/archives/frgeek-michiana/ You
> > may unsubscribe or change your list settings by going
> > to the list website at
> > //www.freelists.org/webpage/frgeek-michiana
> >
> >
> >
> >
> >
>
>
Other related posts:
