[frgeek-michiana] Re: Warehouse
- From: chuq jackels <chuq00@xxxxxxxxx>
- To: frgeek-michiana@xxxxxxxxxxxxx
- Date: Sat, 21 Nov 2009 15:44:39 -0500
Well actually what all we need is: Conduit, 4 junction boxes, wire,
wirenuts, tape, chain, & 4 outlets, covers.
So a Shopping trip will be in order between now and then.
Chuq
On Sat, Nov 21, 2009 at 1:13 PM, john jones <rainman121065@xxxxxxxxx> wrote:
> well all we need is hardwirring and chain for that and a switchbox ive got
> connectors and light switches should be pretty ez
>
>
> --- On *Sat, 11/21/09, chuq jackels <chuq00@xxxxxxxxx>* wrote:
>
>
> From: chuq jackels <chuq00@xxxxxxxxx>
> Subject: [frgeek-michiana] Re: Warehouse
>
> To: frgeek-michiana@xxxxxxxxxxxxx
> Date: Saturday, November 21, 2009, 10:09 AM
>
>
> Phil and I were the only ones there, we cleaned the garage door, and
> started assembling the blue shelving.
> Other than that nothing. We are going to be closed all next week I believe
> due to the holidays and travel plans.
> The goal is to gather the electrical supplies needed between now and then
> so when we come back we are able to start hanging lights.
> Chuq
>
> Sent from South Bend, IN, United States
>
> On Sat, Nov 21, 2009 at 12:22 PM, john jones
> <rainman121065@xxxxxxxxx<http://mc/compose?to=rainman121065@xxxxxxxxx>
> > wrote:
>
>> What did i miss at the warehouse Thursday,did the lights get hung yet?
>>
>> --- On *Fri, 11/20/09, Mike Cook
>> <mikecook@xxxxxxxxxxxx<http://mc/compose?to=mikecook@xxxxxxxxxxxx>
>> >* wrote:
>>
>>
>> From: Mike Cook
>> <mikecook@xxxxxxxxxxxx<http://mc/compose?to=mikecook@xxxxxxxxxxxx>
>> >
>> Subject: [frgeek-michiana] Re: Device inventory software
>> To:
>> frgeek-michiana@xxxxxxxxxxxxx<http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx>
>> Date: Friday, November 20, 2009, 8:30 AM
>>
>> There may be better software out there, slinkydetect is fairly old (2003).
>> I haven't found it yet though.
>>
>> Mike
>>
>> -----Original Message-----
>> From: chuq jackels
>> Sent: Nov 19, 2009 5:22 PM
>> To:
>> frgeek-michiana@xxxxxxxxxxxxx<http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx>
>> Subject: [frgeek-michiana] Re: Device inventory software
>>
>> Slinkydetect would be useful and we could have the generated machineID# go
>> to the barcode # of each system that we assemble. It would make for a good
>> way of logging each system incase someone at some point in time has a
>> hardware failure we can just look them up and know exactly what is in that
>> system and will know which parts would be needed to repair it.
>>
>> Chuq
>>
>>
>> Sent from South Bend, IN, United States
>>
>> On Thu, Nov 19, 2009 at 3:12 PM, Mike Cook
>> <mikecook@xxxxxxxxxxxx<http://mc/compose?to=mikecook@xxxxxxxxxxxx>
>> > wrote:
>>
>>> This is what I was referring to.
>>>
>>> Slinkydetect, an HW detection floppy
>>> http://www.rule-project.org/?q=node/4
>>>
>>> From The Rule Project
>>> http://www.rule-project.org
>>>
>>> Mike
>>>
>>> -----Original Message-----
>>> >From: Tom Brown
>>> ><tbrown@xxxxxxxxxxxx<http://mc/compose?to=tbrown@xxxxxxxxxxxx>
>>> >
>>> >Sent: Nov 19, 2009 12:08 PM
>>> >To:
>>> >frgeek-michiana@xxxxxxxxxxxxx<http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx>
>>> >Subject: [frgeek-michiana] Re: [Fwd: TxMicro :: Motherboard Accessories
>>> :: Diagnostic PCI Card for Mboards]
>>> >
>>> >Looks good to me.
>>> >
>>> >On a related note: Mike mentioned to me a while back software that will
>>> >inventory the devices on a system which would be good for record keeping
>>> >at final finish.
>>> >
>>> >Tom
>>> >
>>> >Richard Zimmerman wrote:
>>> >> I would like to put forward to the board a formal request to purchase
>>> >> a few of these so we can significantly improve our troubleshooting of
>>> >> incoming computers and lower the amount of time in which it takes to
>>> >> do it.
>>> >>
>>> >> Many thanks for considering this...
>>> >>
>>> >> Richard
>>> >>
>>> >>
>>> >> -------- Original Message --------
>>> >> Subject: TxMicro :: Motherboard Accessories :: Diagnostic PCI Card
>>> >> for Mboards
>>> >> Date: Wed, 18 Nov 2009 12:41:26 -0500
>>> >> From: Richard Zimmerman
>>> >> <richard@xxxxxxxxxxxx<http://mc/compose?to=richard@xxxxxxxxxxxx>
>>> >
>>> >> Reply-To:
>>> >> richard@xxxxxxxxxxxx<http://mc/compose?to=richard@xxxxxxxxxxxx>
>>> >> Organization: K&B Transport Inc
>>> >> To: csxt@xxxxxxxxxxx <http://mc/compose?to=csxt@xxxxxxxxxxx>
>>> >>
>>> >>
>>> >>
>>> >> http://www.txmicro.com/Diagnostic-PCI-Card-for-Mboards-p-4318.html
>>> >>
>>> >
>>> >** This list is PUBLICLY archived. **
>>> >PLEASE don't post personal or sensitive information unless you wish for
>>> it to be in the public domain.
>>> >
>>> >To visit the main website for Free Geek Michiana go to
>>> http://www.freegeekmichiana.org
>>> >
>>> >To post to the list send email to
>>> >frgeek-michiana@xxxxxxxxxxxxx<http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx>
>>> .
>>> >The archive is available at
>>> //www.freelists.org/archives/frgeek-michiana/
>>> >
>>> >You may unsubscribe or change your list settings by going to the list
>>> website at //www.freelists.org/webpage/frgeek-michiana
>>> >
>>>
>>> ** This list is PUBLICLY archived. **
>>> PLEASE don't post personal or sensitive information unless you wish for
>>> it to be in the public domain.
>>>
>>> To visit the main website for Free Geek Michiana go to
>>> http://www.freegeekmichiana.org
>>>
>>> To post to the list send email to
>>> frgeek-michiana@xxxxxxxxxxxxx<http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx>
>>> .
>>> The archive is available at
>>> //www.freelists.org/archives/frgeek-michiana/
>>>
>>> You may unsubscribe or change your list settings by going to the list
>>> website at //www.freelists.org/webpage/frgeek-michiana
>>>
>>>
>> ** This list is PUBLICLY archived. ** PLEASE don't post personal or
>> sensitive information unless you wish for it to be in the public domain. To
>> visit the main website for Free Geek Michiana go to
>> http://www.freegeekmichiana.org To post to the list send email to
>> frgeek-michiana@xxxxxxxxxxxxx<http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx>.
>> The archive is available at
>> //www.freelists.org/archives/frgeek-michiana/ You may unsubscribe or
>> change your list settings by going to the list website at
>> //www.freelists.org/webpage/frgeek-michiana
>>
>>
>>
>
>
Other related posts:
