Why do we need all that stuff? Wire up the lights, plug them into the existing plugs and use the existing light switch... We don not need extra light switches in the work area...
Richard chuq jackels wrote:
Well actually what all we need is: Conduit, 4 junction boxes, wire, wirenuts, tape, chain, & 4 outlets, covers.So a Shopping trip will be in order between now and then. ChuqOn Sat, Nov 21, 2009 at 1:13 PM, john jones <rainman121065@xxxxxxxxx <mailto:rainman121065@xxxxxxxxx>> wrote:well all we need is hardwirring and chain for that and a switchbox ive got connectors and light switches should be pretty ez --- On *Sat, 11/21/09, chuq jackels /<chuq00@xxxxxxxxx <mailto:chuq00@xxxxxxxxx>>/* wrote: From: chuq jackels <chuq00@xxxxxxxxx <mailto:chuq00@xxxxxxxxx>> Subject: [frgeek-michiana] Re: Warehouse To: frgeek-michiana@xxxxxxxxxxxxx <mailto:frgeek-michiana@xxxxxxxxxxxxx> Date: Saturday, November 21, 2009, 10:09 AM Phil and I were the only ones there, we cleaned the garage door, and started assembling the blue shelving. Other than that nothing. We are going to be closed all next week I believe due to the holidays and travel plans. The goal is to gather the electrical supplies needed between now and then so when we come back we are able to start hanging lights. Chuq Sent from South Bend, IN, United States On Sat, Nov 21, 2009 at 12:22 PM, john jones <rainman121065@xxxxxxxxx <http://mc/compose?to=rainman121065@xxxxxxxxx>> wrote: What did i miss at the warehouse Thursday,did the lights get hung yet? --- On *Fri, 11/20/09, Mike Cook /<mikecook@xxxxxxxxxxxx <http://mc/compose?to=mikecook@xxxxxxxxxxxx>>/* wrote: From: Mike Cook <mikecook@xxxxxxxxxxxx <http://mc/compose?to=mikecook@xxxxxxxxxxxx>> Subject: [frgeek-michiana] Re: Device inventory software To: frgeek-michiana@xxxxxxxxxxxxx <http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx> Date: Friday, November 20, 2009, 8:30 AM There may be better software out there, slinkydetect is fairly old (2003). I haven't found it yet though. Mike -----Original Message----- From: chuq jackels Sent: Nov 19, 2009 5:22 PM To: frgeek-michiana@xxxxxxxxxxxxx <http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx> Subject: [frgeek-michiana] Re: Device inventory software Slinkydetect would be useful and we could have the generated machineID# go to the barcode # of each system that we assemble. It would make for a good way of logging each system incase someone at some point in time has a hardware failure we can just look them up and know exactly what is in that system and will know which parts would be needed to repair it. Chuq Sent from South Bend, IN, United States On Thu, Nov 19, 2009 at 3:12 PM, Mike Cook <mikecook@xxxxxxxxxxxx <http://mc/compose?to=mikecook@xxxxxxxxxxxx>> wrote: This is what I was referring to. Slinkydetect, an HW detection floppy http://www.rule-project.org/?q=node/4 From The Rule Project http://www.rule-project.org Mike -----Original Message----- >From: Tom Brown <tbrown@xxxxxxxxxxxx <http://mc/compose?to=tbrown@xxxxxxxxxxxx>> >Sent: Nov 19, 2009 12:08 PM >To: frgeek-michiana@xxxxxxxxxxxxx <http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx> >Subject: [frgeek-michiana] Re: [Fwd: TxMicro :: Motherboard Accessories :: Diagnostic PCI Card for Mboards] > >Looks good to me. > >On a related note: Mike mentioned to me a while back software that will >inventory the devices on a system which would be good for record keeping >at final finish. > >Tom > >Richard Zimmerman wrote: >> I would like to put forward to the board a formal request to purchase >> a few of these so we can significantly improve our troubleshooting of >> incoming computers and lower the amount of time in which it takes to >> do it. >> >> Many thanks for considering this... >> >> Richard >> >> >> -------- Original Message -------- >> Subject: TxMicro :: Motherboard Accessories :: Diagnostic PCI Card >> for Mboards >> Date: Wed, 18 Nov 2009 12:41:26 -0500 >> From: Richard Zimmerman <richard@xxxxxxxxxxxx <http://mc/compose?to=richard@xxxxxxxxxxxx>> >> Reply-To: richard@xxxxxxxxxxxx <http://mc/compose?to=richard@xxxxxxxxxxxx> >> Organization: K&B Transport Inc >> To: csxt@xxxxxxxxxxx <http://mc/compose?to=csxt@xxxxxxxxxxx> >> >> >> >> http://www.txmicro.com/Diagnostic-PCI-Card-for-Mboards-p-4318.html >> > >** This list is PUBLICLY archived. ** >PLEASE don't post personal or sensitive information unless you wish for it to be in the public domain. > >To visit the main website for Free Geek Michiana go to http://www.freegeekmichiana.org > >To post to the list send email to frgeek-michiana@xxxxxxxxxxxxx <http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx>. >The archive is available at //www.freelists.org/archives/frgeek-michiana/ > >You may unsubscribe or change your list settings by going to the list website at //www.freelists.org/webpage/frgeek-michiana > ** This list is PUBLICLY archived. ** PLEASE don't post personal or sensitive information unless you wish for it to be in the public domain. To visit the main website for Free Geek Michiana go to http://www.freegeekmichiana.org To post to the list send email to frgeek-michiana@xxxxxxxxxxxxx <http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx>. The archive is available at //www.freelists.org/archives/frgeek-michiana/ You may unsubscribe or change your list settings by going to the list website at //www.freelists.org/webpage/frgeek-michiana ** This list is PUBLICLY archived. ** PLEASE don't post personal or sensitive information unless you wish for it to be in the public domain. To visit the main website for Free Geek Michiana go to http://www.freegeekmichiana.org To post to the list send email to frgeek-michiana@xxxxxxxxxxxxx <http://mc/compose?to=frgeek-michiana@xxxxxxxxxxxxx>. The archive is available at //www.freelists.org/archives/frgeek-michiana/ You may unsubscribe or change your list settings by going to the list website at //www.freelists.org/webpage/frgeek-michiana
-- Richard "Goose" Zimmerman, ke4rit Mishawaka, IN ** This list is PUBLICLY archived. ** PLEASE don't post personal or sensitive information unless you wish for it to be in the public domain. To visit the main website for Free Geek Michiana go to http://www.freegeekmichiana.org To post to the list send email to frgeek-michiana@xxxxxxxxxxxxxx The archive is available at //www.freelists.org/archives/frgeek-michiana/ You may unsubscribe or change your list settings by going to the list website at //www.freelists.org/webpage/frgeek-michiana
