Jim, One possibility might be the order of the available dm's in the dmcfg file. Rich Mueller, Jim D. wrote: > Group, > I am in the process of setting up a WYSE 5150SE box to use as an > xterminal on a 51G box. It has been pretty straight forward so far and > I am > Able to bring up a display manager with no problem. The problem that I > am having is that the WYSE box should be opening a dedicated display > manager, but does not. > > The WYSE box is listed in the host table, and the dmcfg file is > configured to dedicate a display to the WYSE box. Has anyone else run > into a problem like this before. > > Any Help would be appreciated! > > James Mueller > Senior Process Control Engineer > Cliffs Michigan Mining Co. > (906) 475-3534 > JDMueller@xxxxxxxxxxxxxxxxxxxx > > > ############################################################################### > This electronic message and any attachments included with this message are > for the exclusive use of the individual or entity to which it is intended > to be addressed. This message may contain information that is privileged or > confidential and thereby exempt and protected from unauthorized disclosure > under applicable law. If the reader of this message is not the intended > recipient, or an employee or agent responsible for delivering the message to > the intended recipient, be aware that any disclosure, dissemination, > distribution or copying of this communication, or the use of its contents, > is not authorized and is strictly prohibited. If you have received this > communication and are not the intended recipient, please notify the sender > immediately and permanently delete the original message from your e-mail > system. > ############################################################################### > > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > > > > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave