[foxboro] WYSE 5150SE Setup
- From: "Mueller, Jim D." <JDMueller@xxxxxxxxxxxxxxxxxxxx>
- To: <foxboro@xxxxxxxxxxxxx>
- Date: Fri, 4 May 2007 11:10:19 -0400
Group,
I am in the process of setting up a WYSE 5150SE box to use as an
xterminal on a 51G box. It has been pretty straight forward so far and
I am
Able to bring up a display manager with no problem. The problem that I
am having is that the WYSE box should be opening a dedicated display
manager, but does not.
The WYSE box is listed in the host table, and the dmcfg file is
configured to dedicate a display to the WYSE box. Has anyone else run
into a problem like this before.
Any Help would be appreciated!
James Mueller
Senior Process Control Engineer
Cliffs Michigan Mining Co.
(906) 475-3534
JDMueller@xxxxxxxxxxxxxxxxxxxx
###############################################################################
This electronic message and any attachments included with this message are
for the exclusive use of the individual or entity to which it is intended
to be addressed. This message may contain information that is privileged or
confidential and thereby exempt and protected from unauthorized disclosure
under applicable law. If the reader of this message is not the intended
recipient, or an employee or agent responsible for delivering the message to
the intended recipient, be aware that any disclosure, dissemination,
distribution or copying of this communication, or the use of its contents,
is not authorized and is strictly prohibited. If you have received this
communication and are not the intended recipient, please notify the sender
immediately and permanently delete the original message from your e-mail
system.
###############################################################################
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » [foxboro] WYSE 5150SE Setup
